Wheels And Tires For An 2010 2500hd

[jasonr4491]

Thinking about wheels and tires but not sure what size i can clear without rubbing. It has the 17''x7.5'' with 265/70/16's. I have already leveled out the truck with cranking and don't really want to go anymore but was wondering if 285/70/16 on 17x8's will clear without rubbing. Also I have a backspace option in the wheels I'm looking at of 4.5 or 4.75'' backspacing. I would like the wheels to stick out just a little more than the stock ones but don't want to rub either. Just looking for some input on this setup. Thanks Jason

[04JJHD]

i don't know too much about offset wheels but if you stay with your stock wheels you will prolly be fine but like i said i don't know too much about wheels

[Kodiak450]

285's are technically pushing it too much. I've seen 285's on 2500HD's with stock wheels, but I think that size is beyond recommended size for a stock wheel.

[briddle3]

285's are technically pushing it too much. I've seen 285's on 2500HD's with stock wheels, but I think that size is beyond recommended size for a stock wheel.

 

?????????????? says who... I have 285s on stock wheels on a 2500 hd right now and 285s on aftermarket wheels right now on another 2500hd... and in the past i had 305s on stock wheels on yet another 2500 hd... I say go with the 4.75 backspaced 17s with the 285s and drive it like you stole it.

 

Brody

[Kodiak450]

285's are technically pushing it too much. I've seen 285's on 2500HD's with stock wheels, but I think that size is beyond recommended size for a stock wheel.

 

?????????????? says who... I have 285s on stock wheels on a 2500 hd right now and 285s on aftermarket wheels right now on another 2500hd... and in the past i had 305s on stock wheels on yet another 2500 hd... I say go with the 4.75 backspaced 17s with the 285s and drive it like you stole it.

 

Brody

 

 

For one, says GM. It is listed in my door jam on a sticker. And two, places that sell and change tires.