Jump to content

Recommended Posts

Posted

I have a 05 D-max and I would like to know if anyone have ever had the lights that work the radio and other items go out. What I need to know is how doyou replace the lights in the switches or do I have to replace the whole switch.

Posted

whole switch. Surprised that the lights are going out though, I would have thought that they were LED or something.

Posted

My 06 steering wheel lights are burning out too, wasn't sure if they were leds or not, but othey do get really hot when on

  • Like 1
Posted

Most of my steering wheel lights are out. And just the other day my control panel for the light control went out all at once! I'm guessing a short inside.. Once in a while a radio light may go out to. Just have to tap the radio near the light and it pops back on.

Posted

some of mine are out too. not worth the fight IMO...i mean whatever did they do without steering wheel lights in the 60's????? how did they do it :nonod: ahahah

Posted

True, but how many trucks in the 60's had button in the steering wheels for radio, DIC, etc..? :crackup:

Posted

I've had this truck long enough that I don't even look down anymore to "see" which button I'm pushing. My first light went out at 36,001 miles (no joke) & now only have a couple left. If there is a fix it's probably more grief than it's worth to me to fix it. I love the controls but really don't need the lights.

Posted (edited)

I KNEW I've heard of this topic before....I beat my brain for a good 3 days trying to remember where I saw a How-To on this topic. Bounce over to SilveradoSS.com and check out this thread.

 

 

http://www.silverado...trol-light-fix/

 

 

 

Note that it will take some skills with a screwdriver and a soldering iron. But it looks like an inexpensive fix.

Edited by Pittsburgh PK
Posted

I've gone down this road before as well with my '05.

The lights are actually standard micro lightbulbs, though they are tiny.

I guess LED's are more costly.

The whole unit has to be replaced, not worth it in my opinion.

I tried to do one of mine, removing the steering wheel, air bag,etc. wasn't

too bad, but getting the switch out and the wiring is a royal pain in the arse.

The wires are too short to get the switch out without damaging something.

Posted

I got mine out with no problem when I cleaned them. Had plenty of slack in the wire.

 

I did see some replacement switches on Ebay one time.

  • 1 year later...
Posted

I just replace all of the bulbs in my steering wheel controls not hard at all and looks great. i replace them with 3mm blue less and very inexpensive. i do have a question though, after i replaced them i plugged them all in and when i plugged in the last one they all went out. is there a fuse somewhere i cant find to check? i have already checked all the bulbs again they all work fine out of the truck.

  • Like 1
  • 1 year later...
Posted

Thanks to this site, silveradoSS.com I was able to save a nice chunk of money on replacing my steering wheel control lights in my H2. I followed every step from popping each switch out to snapping it back in and worked out pretty easy. I saw one of the sites recommending radio shack #272-1092 mini lamps so I got those and they worked out perfect. Only thing I had an issue with was the short ass wires on the connectors but with a small pick type tool I was able to hold the connector in place while pushing the switch back into the steering wheel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 
    • It also depends on what criteria someone is using for “best” when talking filters.  Are we going off best efficiency?   Best quality/QC?  Etc. because the two may not mutually exclusive.  
    • They’re not the same wiz as 10-15 years ago.  QC has fallen pretty hard.  The XP line was never good though in the first place.    https://bobistheoilguy.com/forums/threads/wix-filter-rusted-through.386492/post-6991372   https://bobistheoilguy.com/forums/threads/i-ve-used-my-last-wix-filter.27299/   https://bobistheoilguy.com/forums/threads/looking-for-a-better-replacement-for-wix-51258.403977/   https://bobistheoilguy.com/forums/threads/convince-me-in-using-the-purolator-boss.401537/post-7420147   the forums are littered with posts and examples of not great wix filters the last couple years 
    • *Your      
    • I'd guess that it's because they are Mann-Hummel filters since about 2016, they own Wix and are mostly all made in China now. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...