Jump to content

JOTD: Oh, to be a KID again!!!


Bad Bowtie2

Recommended Posts

Posted

Around age 10 my dad got me one of those little kick-a compound bow beginner kits. Of course, the first month I went around our land sticking arrows in anything that could get stuck by an arrow. Did you know that a 1955 40 horse Farmall tractor tire will take 6 rounds before it goes down? Tough son-of-a-gun.

That got boring, so being the 10 yr. old Dukes of Hazard fan that I was, I quickly advanced to taking strips of cut up T-shirt doused in chainsaw gas tied around the end and was sending flaming arrows all over the place. One summer afternoon, I was shooting flaming arrows into a large rotten oak stump in our backyard. I looked over under the carport and see a shiny brand new can of starting fluid (Ether). The light bulb went off in my head. I grabbed the can and set it on the stump. I thought that it would probably just spray out in a disappointing manner. Lets face it, to a 10 yr old mouth-breather like myself, (Ether), really doesn't "sound" flammable. So, I went back into the house and got a 1 pound can of pyrodex (black powder for muzzle loader rifles).


At this point, I set the can of ether on the stump and opened up the can of black powder. My intentions were to sprinkle a little bit around the (Ether) can but it all sorta dumped out on me. No biggie, a 1 lb. pyrodex and 16 oz (Ether) should make a loud pop, kinda like a firecracker you know? You know what? Screw that I'm going back in the house for the other can.

Yes, I got a second can of pyrodex and dumped it too. Now we're cookin'.

I stepped back about 15ft and lit the 2 stroke arrow. I drew the nock to my cheek and took aim. As I released I heard a clunk as the arrow launched from my bow. In a slow motion time frame, I turned to see my dad getting out of the truck... OH CRAP!! He just got home from work. So help me God it took 10 minutes for that arrow to go from my bow to the can. My dad was walking towards me in slow motion with a WTF look in his eyes. I turned back towards my target just in time to see the arrow pierce the starting fluid can right at the bottom. Right through the main pile of pyrodex and into the can. Oh Shoot!!!

When the shock wave hit it knocked me off my feet. I don't know if it was the actual compression wave that threw me back or just reflex jerk back from 235 fricking decibels of sound. I caught a half a millisecond glimpse of the violence during the initial explosion and I will tell you there was dust, grass, and bugs all hovering 1ft above the ground as far as I could see. It was like a little low to the ground layer of dust fog full of grasshoppers, spiders, and a worm or two.

The daylight turned purple. Let me repeat this... THE FRICKING DAYLIGHT TURNED PURPLE!!

There was a big sweetgum tree out by the gate going into the pasture. Notice I said "was". That son-of-a-gun got up and ran off.

So here I am, on the ground blown completely out of my shoes with my thundercats T-Shirt shredded, my dad is on the other side of the carport having what I can only assume is a Vietnam flashback: ECHO BRAVO CHARLIE YOU'RE BRINGIN' EM IN TOO CLOSE!! CEASE FIRE. DANGIT CEASE FIRE!!!!!

His hat has blown off and is 30 ft behind him in the driveway. All windows on the north side of the house are blown out and there is a slow rolling mushroom cloud about 2000 ft. over our backyard. There is a Honda 185 3 wheeler parked on the other side of the yard and the fenders are drooped down and are now touching the tires.

I wish I knew what I said to my dad at this moment. I don't know - I know I said something. I couldn't hear. I couldn't hear inside my own head. I don't think he heard me either... not that it would really matter. I don't remember much from this point on. I said something, felt a sharp pain, and then woke up later. I felt a sharp pain, blacked out, woke later....repeat this process for an hour or so and you get the idea. I remember at one point my mom had to give me CPR. and Dad screaming "Bring him back to life so I can kill him again". -Thanks Mom.

One thing is for sure... I never had to mow around that stump again, Mom had been griping about that thing for years and dad never did anything about it. I stepped up to the plate and handled business.

Dad sold his muzzle loader a week or so later. I still have some sort of bone growth abnormality, either from the blast or the beating, or both.

 

:rollin::D:crackup:

I guess what I'm trying to say is, get your kids into archery. It's good discipline and will teach them skills they can use later on in life.

Posted

Reminds me of that pic I've seen on the net about childhood experiments with a kid sitting beside an electric socket with a fork or knife in his hand.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined
  • Who's Online   0 Members, 0 Anonymous, 432 Guests (See full list)

    • There are no registered users currently online
  • Latest Articles

  • Posts

    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...