Woodgrain trim, center console and rear door panels

[MikeySierra]

Good day all,

 

I have a crew cab and really sick and tired of looking at the wood grain trim on the door panels and center console. Why they would put wood grain with nothing to match is beyond me.

 

I can get the front door panel trims off but can't get the read door or center console trim off. I have seen 4 tabs on the center console trim but can't seem to get it to release from the center console.

 

Can somebody help me out please?

 

Thanks in advance

 

Mike

[jeffsig]

You have to take the center console out to get the very front tabs. Open the center console lid and pull up hard where the cup holders are.

 

You really should have a plastic trim remover to help pry all the wood grain panels. It makes it a lot easier.

[MikeySierra]

You have to take the center console out to get the very front tabs. Open the center console lid and pull up hard where the cup holders are.

 

You really should have a plastic trim remover to help pry all the wood grain panels. It makes it a lot easier.

Thanks Jeff, I do have the plastic trim tools and yes they help greatly.

 

I did pull the two bolts under the storage and didn't get much movement, probably because I didn't force the issue. Are there anymore bolts besides those two?