Jump to content

New member with familiar issues


Recommended Posts

Posted

Hello everyone, new 2016 canyon slt 4x4 v6. Here's a little recent past history. Aug 30, bought 16 silverado z71, returned to dealer 8 days later due to vibration issues. Test drove 2 colorados (1 diesel,1 v6) both had a little over 500miles on them. Both had vibration around 40mph and more noticeable at around 80mph. I then went to a gmc dealer. I was under the impression that the gmc was a "better built" truck. I guess I should have thought that through a little better. Anyway, I test drove the truck I now own for almost 100 miles. BTW, the truck had just been pulled off the transport, had 4 miles on it and plastic covering the interior. The truck drove fine with no vibrations so I bought it. At around 700 miles I've noticed the truck just isnt very smooth and i can feel every little pebble on the road. I also started noticing some shaking periodically around 80mph. Took the sls Mgr on a ride with me and of course it barely shook at all. He said he would document it for me but that he couldn't really do anything at this point. He said that these trucks are very stiff and that it felt pretty normal to him. Couldnt argue much at the time because it really didnt drive that bad while he was in there. Maybe I'm just jaded now, idk. Just wondering if anyone has swapped shocks, tires, wheels or anything to improve the ride quality of theses trucks. Thanks in advance for any info.

Posted

Tire issues comes to mind. I think I saw somthing back on the 2nd Colorado/Canyon forum. Good luck

  • 1 month later...
Posted

Hello everyone, new 2016 canyon slt 4x4 v6. Here's a little recent past history. Aug 30, bought 16 silverado z71, returned to dealer 8 days later due to vibration issues. Test drove 2 colorados (1 diesel,1 v6) both had a little over 500miles on them. Both had vibration around 40mph and more noticeable at around 80mph. I then went to a gmc dealer. I was under the impression that the gmc was a "better built" truck. I guess I should have thought that through a little better. Anyway, I test drove the truck I now own for almost 100 miles. BTW, the truck had just been pulled off the transport, had 4 miles on it and plastic covering the interior. The truck drove fine with no vibrations so I bought it. At around 700 miles I've noticed the truck just isnt very smooth and i can feel every little pebble on the road. I also started noticing some shaking periodically around 80mph. Took the sls Mgr on a ride with me and of course it barely shook at all. He said he would document it for me but that he couldn't really do anything at this point. He said that these trucks are very stiff and that it felt pretty normal to him. Couldnt argue much at the time because it really didnt drive that bad while he was in there. Maybe I'm just jaded now, idk. Just wondering if anyone has swapped shocks, tires, wheels or anything to improve the ride quality of theses trucks. Thanks in advance for any info.

The stiff ride is the price paid for bigger payload ratings and stable towing performance. Older trucks might have gotten away with a smooth ride for its claimed payload, but those numbers were often inflated. Your new Canyon has towing and payload capabilities that are closer to a half-ton made 15 years ago.

 

I would recommend putting a sanddbag or two in the back of the truck a couple hundred lbs will make all the difference in the ride. Bilstein shocks are highly recommended upgrades on here.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I'm not sure if this should be a new topic, let me know if it's out of place. This my first post. Thanks 85077522 - AC Delco GM Genuine Parts Brake Master Cylinders. Anyone else had to replace this brake master cylinder yet. I didn't do any brake work, it looks like new parts and I've had the truck for about 4k miles, 119k total miles.  When it started to throw codes I did the calibrations with a bidirectional scanner and got the codes to clear but they came back so I did the routine; base bleed, automated bleed and final base bleed. All that with Bosch ES16-32N fluid (please look it up). That seemed to fix it but 100ish miles later it failed again so I ran the same process but with a pressure bleeder this time and got the same results, fixed for 100ish miles. The original fluid looked bad and I thought I got most of it out, it could've been the wrong fluid. The codes; P25A2, C05B0-00, C2A1B. I can get them to clear but not for long. The C05B0 indicates a leak in the front circuit (which is bone dry) so I'm thinking of doing the bleed process on that front again today and I don't know if that's taboo to just do the front but at this point it seems like it's worth the try anyway. The new master cylinder/module unit is supposed to get here today. But now I'm pretty much convinced this install is over my head. I've called several shops and some mobile guys that I know but this thing is like radio active material, scary wise. I did get 2 local shops say they should be able to do it, one says he has the SPS2 programing capability. And with the battery disconnected is there supposed to be pedal resistance, mine is to the floor, then if I pump it I can get some resistance. I had a panic stop prior to this issue which may have contributed from what I read. And on the first attempt to bleed and hydraulic test the scanner listed things to look for and one was any gaps between the pad and rotors which I did notice on the RF corner and I removed the outer pad (where the gap was) cleaned it and the hardware and didn't see a gap after that but will re-check it. I read that if pushing the caliper pistons back then you're supposed to open the bleeder so as to not push fluid backwards into the abs module or it will damage it. If that's true then that's also a possibility from the previous owner having the brakes changed before I got it. I'm using an XTool ip500 scanner. Any suggestions, questions and comments welcome. 
    • Next Friday will be my 6 week point from my right knee replacement.  The surgeon says it will be fine if I choose to drive after this checkup.  I know I could drive now but best to do as my surgeon (and my wife) tell me.  Richard compared being 62 to 72.  I remember when I was in my early 60's I was experiencing slow but regular decline in my mobility.  Thanks to good medical support,  i continued to fight the speed and spread of this decline. During my 60's I worked on non-surgical methods and just when I turned 70, my orthopedic surgeon recommended joint replacements.  In a little over a year, I had one shoulder and both knees replaced.  This hasn't been a terribly fun experience, but worth the discomfort as my future mobility health trajectory has reversed.  It is a treat to now be watching my mobility. balance and confidence steadily improve!
    • Grommets with the right cement should be perfectly fine. 
    • This is going to take allot of Assembly    
    • Why do they have the gas 10l80 opening at 145?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...