Jump to content

Recommended Posts

Posted

I own a 2015 Chev. Silverado 2500HD.   So here is my problem.

I have no left Trailer Stop/Turn signal.  The truck's left Stop/Turn signal light (tail light) operates normally.

The trailer stop/turn signal is provided through a relay (my schematic calls it KR63L) contact.  The relay contact's output is connected to fuse F14 (10A).  The other fuse terminal is connected to the trailer connector.

The fuse is ok.  When the left turn signal is on there is no voltage on either of F14 terminal.

I hope my problem is the relay.  The schematic shows KR63L and KR63R to be located on the same fuse block as the F14 and F17 (right Trailer Stop/Turn fuse).  My fuse cover shows both F14 and F17 fuses but does not indicate the relays.

Can someone tell me find the Trailer Stop/Turn relay KR63L and KR63R? 

 

 

20200109_205722.jpeg

20200109_205803.jpeg

  • 2 years later...
Posted

Was there ever an answer to this issue? I am running into the same problem now and cannot find the KR63L left turn relay for trailer output.

  • 8 months later...
  • 8 months later...
Posted

The KR63R and KR63L are integrated onto the circuit board of the main fuse block.  Gm says they are not servicable but I've seen it done on YouTube.  To fix the trailer turn signal lights and brake lights, it will need replaced or repaired.  Check out this YouTube repair for the winsheild wipers relay. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...