Jump to content

USB ports not working

Darth Potatoes
 Share

Recommended Posts

Darth Potatoes Enthusiast

Darth Potatoes

Posted
Posted

Hey all I have a 2019 Silverado that I've had about a month. I've noticed that 2 of the 3 USB ports in the truck stopped working. The 3 USB type c ports all work and the USB in the rear of the cab still works.

Has anyone experienced this? I'll call the dealership in the morning and let them know do we can get it fixed, but curious to see if anyone else has had it happen to them.

I love my truck but that doesn't bode well with me.

 

Thanks

 

 

Sent from my GM1917 using Tapatalk

 

 

bearded_warrior Enthusiast

bearded_warrior

Posted
Posted

I had a 2019 that the usb-c/usb in the console quick working. GM repurchased that for some other issues and my 2020 is dropping the android auto connection randomly. Really irritating, happening on all usb-c ports, hard to tell if it's a wiring issue or an infotainment bug. 

  • 2 years later...
Brent T New Member

Brent T

Posted
Posted

I have a 2021 GMC Sierra.  I tried playing music off a new Ipod on my way home and could never get the truck to 'see' my device.  It recognizes my Samsung S21 but can't get the Ipod recognized any which way.  Called the Customer Service number and sadly, they said they don't have a clue after reading to me what the owners manual says.  I'm not a happy customer GMC in case you are following these forum conversations!

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
18 hours ago, Brent T said:

I have a 2021 GMC Sierra.  I tried playing music off a new Ipod on my way home and could never get the truck to 'see' my device.  It recognizes my Samsung S21 but can't get the Ipod recognized any which way.  Called the Customer Service number and sadly, they said they don't have a clue after reading to me what the owners manual says.  I'm not a happy customer GMC in case you are following these forum conversations!

This is certainly not what we like to hear, Brent T.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2021 GMC Sierra. To do so, please send an email to [email protected] with ATTN: Brent T/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • 11 months later...
fuzz610 New Member

fuzz610

Posted
Posted (edited)

i have a 2021 GMC Sierra and the usb ports in the center console under the armrest and in the rear of the console for the backseat  quit working, is this an easy fix?

Edited by fuzz610

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   7 Members, 0 Anonymous, 1,139 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...