Jump to content

Dash instruments and other electronic stuff stops working while driving

Chad Golden

Recommended Posts

Chad Golden New Member

Chad Golden

Posted
Posted

I have a 2010 silverado and am having problems figuring out why while driving the dash instruments, radio, power to windows, and control to the AC stops working I have replaced the ignition switch and thought it fixed the problem but a month since I changed it and it seems to be worse then before 

Colossus Senior Enthusiast

Colossus

Posted
Posted

99% sure you have a ground issue.  I'd give the negative battery cable a good over and work your way from there.  Had this issue on a 07 Sierra.  Was very random and dealer could not figure it out by the time I got rid of it.  But lots of others on here posted similar issues and the negative battery cable was the place to start and for many fixed the issue.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • GAMark
      Road Master Active Suspension

      By GAMark · Posted

      Most 1 ton trucks come with the factory overload spring, which need to be removed for installation of RoadActive Suspension. Removing the overload allows proper fitment and ensures the system works as intended. The RAS® Mega-Duty kit will reduce squat and provide significant improvement vs the factory overload spring.
    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      I wonder as well, why they would send me a text message with links to these suggested procedures totalling over $10,000 without even the slightest hint of how they arrived at these being necessary.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      https://precisionlubrication.com/articles/oil-filter-efficiency/     For them it is a problem of $$$$ and compliance. To cover both they have to lie from the heart.    Government wants low waste oil numbers so the bar needs to be very low on contamination to met that requirement.  Consumer wants cheap maintenance (perceived cost). Again requiring a low bar.  OEM wants high margins at a cost effective warranty rate and lots of repeat customers. More low bar.  Filter manufacture wants the same thing the OEM wants. See the pattern?   Consumers are fickle and also want perfection requiring a HIGH bar. Inconsistent with all of the above. Consumers can be, when the put their minds to it, inquisitive, love winning arguments which requires some useful information to be available to support them. And this is where it gets sticky and the lies begin.    Information needs a solid well grounded point of reference if we are to compare in a useful way. There is a standard for this.  ISO 4548-12. This standard sets the particle size at a specific Beta ratio and darn few are faithful to its intent.    If they don't state the test method they change the particle size or the Beta ratio to hit a perceived favorable standard. They obscure the information in a way as to prevent direct comparisons leaving the consumer with one method. UOA's with an ISO 4406 test result. Pricey and not allot of labs willing to do the work. Lobby work happens everywhere, not just at the seat of government.       
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      IF,IF,IF. If they cared about quality instead of profit and this applies to any company, what a concept. 
    • Christopher Miller
      2001 GMC Sierra - Banging feeling in steering wheel

      By Christopher Miller · Posted

      Good Morning Gents..hope everyone is enjoying a beautiful saturday morning. I have a 2001 GMC Sierra that I bought used in 2018. I am the 2nd owner and its a beautiful truck. Ive put about 60,000 miles on it and recently the front end has felt funny. Kind of loose when hitting bumps adn sometimes I actually feel a "bang" in the steering wheel. I took it to a local guy who said that everything was tight and he tightened the steering box. It didnt feel much better, so I had him replace the front shocks, which had noto been done since I bought it. It had the check enging light on so I took it into a local garage to fix that and check out the suspension. Everything is original and the rubber bushings that I can see look bad. They said everything was tight and there wasnt any play in the front end. Im concerned about the banging feeling in the wheel. Ive been driving this truck for 8 years, so I know how it usually feels and this is something new. Its a second vehicle, so I dont drive it all the time, but Im trying to use it more often. I live out in the country and some of the  roads are kind of rough and I alive on gravel roads. Anyone deal with anything like this before? 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...