Door Speaker connector issues

[Selo]

In the beginning steps of a tow mirror upgrade.  I have a 2019 Silverado 1500 Legacy with stock DL8 (power adjust, heated) am upgrading to DL3  level tow mirrors (power adjust, heated, turn signal}.  Received excellent help and wiring from Pgamboa, I think he is a member here.  So today I removed the inside door panel on the passenger side to mount the mirror and access the wiring harness.  The process requires removing the door speaker.  Piece of cake.............until I got to the speaker wiring connector.   I am embarrassed to say I am stumped as I can not get it to release.  I am sure it something simple.  The connector has a red component that can be moved up (see picture).  I have moved it up but the connector will not dis-connect.  I have refrained from trying to use too much force, don't want to damage it. In the picture I have lifted the red part of the connector.  What am I missing?

 

 

 

[Nalby]

If the red tab is lifted up, usually just push in the tab below the red connector and pull the connectors apart.

[Selo]

Nalby thanks.  I did not see a tab to press, but knowing there is something there to press I'll give it a try later this morning. 

[fishlessam]

Or use a small pick and go from underneath the connector and lift up the tab and pull up 

[Selo]

Well, as I had figured, it was something simple I did not realize. Got it off....piece of cake. Thanks for the responses. 

 

Selo