Bilstein 5100 RHA shocks with ReadyLift SST +2 on an AT4?

[loud_pipes]

2020 AT4, 5.3L/10 spd, ReadyLift SST +2” with UCAs.

 

I am thinking of upgrading my Ranchos to Bilsteins. While I’m at it, can I go another inch higher with my kit, getting to a total of 5” (2” AT4 package factory lift, 2” ReadyLift, 1” adjustment on the Bilsteins)? I sit exactly level now with the stock blocks in the rear, so if I add 1” upfront and put the ReadyLift blocks in the rear, I will still sit level.

 

I have no reason to do this other than I love working on my truck and making it personalized. So this is just for a fun and aesthetics factor. I am running 33x12.5x20 wheels currently, and if I added the inch, I would likely go 35x11.5 or 35x12.5 depending on clearance.

 

I don’t want to sacrifice ride quality, but I’m thinking it would improve with the Bilsteins.

 

https://www.bilsteinlifts.com/shop/chevy-gmc/silverado-1500/2019/bilstein-b8-5100-rha-0-1-1-front-lift-shocks-for-2019-2020-gmc-sierra-1500-2wd-4wd/

 

Any advice or thoughts?

 

 

Sent from my iPad using Tapatalk Pro

[lapoolboy]

If you want to run the Bilsteins with the ReadyLift, they will need to be set at stock height.

[loud_pipes]

If you want to run the Bilsteins with the ReadyLift, they will need to be set at stock height.

That’s exactly what I was hoping to learn. Thanks LA, the really helps. Appreciate it.


Sent from my iPhone using Tapatalk Pro