Jump to content

Recommended Posts

Posted

So,I did the jump seat conversion in my 2020 LT TB to the full console upgrade a couple weeks ago ....I bought the harness that connects the lower dash usb to the usb inside the console with the sd reader...I hooked everything up there's power to the charger cable i coming from it,but now my radio gets stuck on the gm screen and just stays there....I popped the inside the console usb/sd reader out and unplugged the usb that runs to the usb up front and the radio works fine now....Anyone know why this is happening??

8A9D9AEF-AF9B-418A-95AA-F86B83A0D49D.jpeg

Posted

I Had the Same Problem when i did mine . I thought is was a bad radio because it did not happen right away. I have a Custom model. So i suspect it has something to do with that. I just left the center console usb disconected.

 

Posted
5 hours ago, Zelas said:

I Had the Same Problem when i did mine . I thought is was a bad radio because it did not happen right away. I have a Custom model. So i suspect it has something to do with that. I just left the center console usb disconected.

 

I'm guessing the SD/USB is programmed to the previous radio/truck it came out of...It doesn't even make sense why it doesn't work

Posted
I'm guessing the SD/USB is programmed to the previous radio/truck it came out of...It doesn't even make sense why it doesn't work

I don’t think that’s the problem. I bought new ones and swap them both. Is your truck a custom too ? I think that the 8 inch version radio supports them both and not 7 inch


Sent from my iPhone using Tapatalk
Posted
1 hour ago, Zelas said:


I don’t think that’s the problem. I bought new ones and swap them both. Is your truck a custom too ? I think that the 8 inch version radio supports them both and not 7 inch


Sent from my iPhone using Tapatalk

Hey!!!No,I have a 2020 LT TB with Conv Package 1 with the 8" IOR option code....I know you can get my same truck from the dealek with bucket seats option with conv pack 1 and it's basically what I have now...I bet that SD/Usb has to be programmed to the truck to work from the dealer....Did you use the sd/usb that came with your console,or did you buy new one??..I noticed on my 4" screen on my cluster when I have the Sd/USB is hooked it up displays a message for me to roll up my drivers window and put it down...It only displays that message when i hook the sd/usb up...It's absolutely ridiculous that's not just a plug and play...WTF?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Those can be high, as well as the big California cities. The ones that will pop your eyes out are the 395 corridor on the Eastern side of the Sierra Nevadas. Lee Vining, $7.19 for regular and $8.89 for diesel is what the Google said right now.
    • Correct.  2019-2021 model years are serviced by a different p/n.  19420611.  Recall 2021s use 19420611.   The recall engines 2022-2024 model years are serviced with 12740076.     The difference between 19420611 and 12740076 is GM changed injector size for 2022.  The injectors are smaller on 12740076 with smaller injector bores in the cylinder heads to match the smaller injectors.  So you can't install a 19420611 in a 2022-2024, and you can't install a 12740076 in a 2019-2021.     Both engines are the replacement engine p/ns that are in the L87 recall.  So both of these are the updated engines.     Here's a version of the L87 recall with the p/ns for all the parts needed.    RCRIT-25V274-7075.pdf   Note it shows 19420611 and 12740076 with an asterisk to a footnote "Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which part to order if two or more part numbers are listed for the same part, as it may vary by vehicle options."    
    • Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
    • you might read through the info on gmupfitter.com for your truck, to find a good power source.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...