Jump to content

Antenna plug removal

TCL1962
 Share

Recommended Posts

TCL1962 New Member

TCL1962

Posted
Posted

I posted this in the Mod board but haven't had any responses so I thought I would try here as well.

 

I have a 2020 Silverado WT provided by my company.  My 2016 had a 3.5MM audio plug in the center console and I had a Sirius radio that I connected that way.  Chevy has stripped these trucks way down and no longer gives you a 3.5MM jack (or any storage for that matter).  The Sirius radio came with an FM adapter that goes in series with the normal FM radio antenna which then allows you to tune to a station on the radio to listen to the receiver.  I located what I am pretty sure is the antenna connection behind the passenger dash below the glove box.  I don't know how to get the cable out to see if it is the same style as the Sirius adapter.  In the old days you just pulled hard but this looks like it may have a captive plug that needs to be released but I can't see well enough to tell.

 

I found a picture from back in 2019 on this forum that has a good image of the unit,  It's the black coax that I assume is the FM antenna,

 

Can anyone tell me what has to be done to release the cable?  Thanks in advance.

 

 

chevy.jpg

Transient Senior Enthusiast

Transient

Posted
Posted

Looking at the pic, you'd have to squeeze the black tab on the back of that cable while pulling it out to release it. The pic doesn't show much of that black tab. They're could be a red or white plastic tab inside of it at the very end. If there is you'll need to pull that down first to disengage the lock so you can do the first thing I said. I've found fingernails aren't enough to pry a locking tab down. You'll need a pick or some other tool to help out.

Sent from my SM-N960U using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • parthery
      GM Hard Folding Tonneau by REV review

      By parthery · Posted

      Some clarification may help with some of these issues.   - Rev Industries is/was the division of BAK (now Realtruck) that makes covers under the OEM names.  So if you see one with a Ford logo on it, or if you are buying the GM Accessories cover, you are essentially buying a BAK G2 cover with different branding.   - Rev Industries now markets under RealTruck "Advantage."   - As of May 1, 2025, the Advantage covers now have a 5 year warranty.  Anything before that was a 36/36K warranty.   - Parts for the covers are available from Realtruck or BAK.  The email address to reach them is [email protected] or you can call them at 818-365-9000   - If the entire cover has to be replaced, you have to go through your local GM dealer.  Service dept opens an RO, notes the damage and submits it as a warranty claim.  Keep your paperwork handy so they can confirm when you purchased it and it's within the warranty timeframe.  Once the warranty claim is approved, Parts orders the replacement cover.  When it arrives at the dealership, service will remove and install the new one for free as labor is included under warranty.   - The Advantage covers are not the latest and greatest Gen 3 covers.  They still use the old school clamps, elevator bolts, etc...If you want the newer technology, consider buying your cover in the aftermarket world.  That way, if you have an issue you can deal directly with the manufacturer.   - Finally, RealTruck has a program with many of their authorized dealers that doubles the warranty to 10 years if the authorized dealer does the install.     Hope this helps.
    • parthery
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By parthery · Posted

      Welcome to the group!  My '22 just crossed 150K miles.  Runs perfectly.  Oil pump belt will be done in the next 30 days or so and onward hopefully for another 150K.  Love the truck.
    • richard wysong
      Needing this part.

      By richard wysong · Posted

      Still looks like a rivet to me in the pics, I don't see a nut and none of the pics show the head of the screw. But if you says so.....
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all the help so far!   I did try right from 2026 right down to 2021, and only from 2023 down lets me select the option for tire psi change, but I get the vehicle not supported error!   I'll definitely try it under Chevrolet after work today, and I'll get the sensor number from gm for my truck tire sensors. And I'll let you know if it works for me under Chevrolet!   And if that doesn't work, I'm going to guess that what @Atlas said about maybe I have a different body control module could be true!  
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...