Jump to content

Long travel kit concerns.

Juggsauce
 Share

Recommended Posts

Juggsauce Enthusiast

Juggsauce

Posted
Posted

My application is overlanding and maybe some medium speed over bumps. I don't really like lift kits because I'm not interested in cutting the frame and I feel like it will be easier to liquidate a long travel kit should I sell the truck. I also like that LT kits actually give you more center clearance since it doesn't drop the LCA mounting points.

 

The biggest thing I'm apprehensive about with LT kits is I don't see any with sway bar attachments. I tow a 7500lb camper cross country with my truck and without a sway bar I'm worried about how well it would tow. Anyone on here have the baja or dirt king kit? How bad is the truck on road without a sway bar? Thanks in advance for input.

 

HK_Crew Enthusiast

HK_Crew

Posted
Posted

Running a sway bar on a long travel kit can be tricky. Causes all sorts of clearance issues.

 

I'd probably re-think a long travel kit for your usage. I think a mid-travel kit would probably work out better for you. King/fox/icon coil overs with a new UCA and maybe even a stock length LCA would be a massive improvement over stock.

Juggsauce Enthusiast

Juggsauce

Posted
  • Author
Posted
2 hours ago, HK_Crew said:

Running a sway bar on a long travel kit can be tricky. Causes all sorts of clearance issues.

 

I'd probably re-think a long travel kit for your usage. I think a mid-travel kit would probably work out better for you. King/fox/icon coil overs with a new UCA and maybe even a stock length LCA would be a massive improvement over stock.

I didn't realize there were mid travel kits. Does that refer to just a UCA swap and coilovers or do they come with LCAs with sway bar linkage?

HK_Crew Enthusiast

HK_Crew

Posted
Posted
2 hours ago, Juggsauce said:

I didn't realize there were mid travel kits. Does that refer to just a UCA swap and coilovers or do they come with LCAs with sway bar linkage?

Mid- travel is usually UCA and coil overs.

 

However Baja Kits makes a stock length LCA with an option for a swaybar connection.

https://www.bajakits.com/i-31570261-19-silverado-sierra-1500-2wd-4wd-stock-width-lower-arm.html?ref=category:1459192

Juggsauce Enthusiast

Juggsauce

Posted
  • Author
Posted
7 hours ago, HK_Crew said:

Mid- travel is usually UCA and coil overs.

 

However Baja Kits makes a stock length LCA with an option for a swaybar connection.

https://www.bajakits.com/i-31570261-19-silverado-sierra-1500-2wd-4wd-stock-width-lower-arm.html?ref=category:1459192

Interesting. I wonder what the point is if they're the same length as stock? Stronger surely but no lift or additional travel. I guess I'll just have to go with UCA, coilovers, and a 1 inch front lift. It's just a shame I'll be murdering my half shafts with that setup. I guess I was kinda hoping somebody would tell me coilovers and LT would be stuff enough not to need a sway bar on the road 🤣🤣. I appreciate all the input.

hushpuff New Member

hushpuff

Posted
Posted (edited)

I tow a 3400# enclosed sled trailer with up to 3 sleds and gear so closer to 7000#, on 37's with no swaybar on a Bajakits 4wd long travel kit. I have deavers in the rear but airbags on daystar pads. Runs great. Little under geared but the 6.2 tugs it all pretty good and trans temps stay right around 150-170.

 

There is some spindle modification required (grinding) to clear the LCA on this kit. I bought the swaybar links thinking I'd install them to tow in the winter but have not even considered putting them on. I would recommend going with the dirt king kit over the Baja Kits for fit, finish, and features. 

 

 

63502880146__63A2A267-671F-475A-829C-DE7FD75D9137.jpeg

Edited by hushpuff
Additional info
Juggsauce Enthusiast

Juggsauce

Posted
  • Author
Posted
29 minutes ago, hushpuff said:

I tow a 3400# enclosed sled trailer with up to 3 sleds and gear so closer to 7000#, on 37's with no swaybar on a Bajakits 4wd long travel kit. I have deavers in the rear but airbags on daystar pads. Runs great. Little under geared but the 6.2 tugs it all pretty good and trans temps stay right around 150-170.

 

There is some spindle modification required (grinding) to clear the LCA on this kit. I bought the swaybar links thinking I'd install them to tow in the winter but have not even considered putting them on. I would recommend going with the dirt king kit over the Baja Kits for fit, finish, and features. 

 

 

63502880146__63A2A267-671F-475A-829C-DE7FD75D9137.jpeg

Thanks so much for the input! So the truck doesn't sway too much under normal turns? 

 

Now I've just gotta find a rim that can compensate a little for the 3 extra inches of control arm. They don't make fenders for the GMC to my knowledge so if I can have the track in the front only about 4 inches wider that would be perrrrfect!

hushpuff New Member

hushpuff

Posted
Posted

I went with 0+ offset wheels and the KO2's are technically 36" but when I had stock fenders the tires definitely smashed them on full compression. The fiberwerx fenders clear great but don't do much for mud and road spray. I wish someone would come out with 6.5' bedsides. Tires still hit the factory fender liners as I re-used them and added HDPHE extensions to seal up the gap on the wider fender. 

 

Truck sways more than stock for sure but it's never uncomfortable or unnerving. No sway bar upfront might just be my favorite mod after the kings. 

Juggsauce Enthusiast

Juggsauce

Posted
  • Author
Posted (edited)
48 minutes ago, hushpuff said:

I went with 0+ offset wheels and the KO2's are technically 36" but when I had stock fenders the tires definitely smashed them on full compression. The fiberwerx fenders clear great but don't do much for mud and road spray. I wish someone would come out with 6.5' bedsides. Tires still hit the factory fender liners as I re-used them and added HDPHE extensions to seal up the gap on the wider fender. 

 

Truck sways more than stock for sure but it's never uncomfortable or unnerving. No sway bar upfront might just be my favorite mod after the kings. 

Hmm, at the biggest I'd probably go with 34s on mine, do you reckon they would still rub at full compression on stock fenders? No worries if youre not sure, probably gonna call the manufacturer today.

Edited by Juggsauce
Juggsauce Enthusiast

Juggsauce

Posted
  • Author
Posted
5 hours ago, hushpuff said:

Bajakits claims that 35's will fit without contacting so you should be fine at 34. Send an email over to [email protected], he'll be able to fill you in on tire size and wheel spacing, etc.

One more question! Did he tell you there's a sale ending tomorrow? Planning on doing business with them in a few months but wanted to know if he says that to everyone 🤣

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,915
    Total Members
    8,960
    Most Online
    ChristopherDobson
    Newest Member
    ChristopherDobson
    Joined

  • Who's Online   2 Members, 0 Anonymous, 1,164 Guests (See full list)

  • Latest Articles

  • Posts

    • ChristopherDobson
      Vehicle Payments

      By ChristopherDobson · Posted

      Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • davester
      cam upgrade in CA

      By davester · Posted

      apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • davester
      Possible lifter tick after DOD delete

      By davester · Posted

      yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...