Jump to content

Recommended Posts

Posted (edited)

New Silverado 2500hd owner (2022 LT)

The backup camera has 2 options to select from the vehicle path or trailer path but does not allow hitch view. Is that something the dealer can activate? Also, the camera quality is poor. At night the screen is so bright and grainy it can barely be used. In the Ram I traded in I could set different trailers and see very clearly. With this new truck hooking up the trailer is a challenge to say the least. What can be done to make this better? Window sticker says it has the trailering package with hitch guidance but when I search that this vehicle clearly does not have those options. Is this an error on GM or what? Thanks for any input. 

Edited by Jayroc7113
Typo
Posted (edited)

I don't know about LT trims but my LTZ has Task Lighting and that provides an LED light in the tailgate that lights the hitch area at night making hitching the trailer easier.  From what I've read, camera features cannot be added if not installed at the factory.

 

The reason the display is grainy is due to the system trying to display detail that isn't easily captured in low light.  Even the best cameras struggle when there is too little light.  The solution is to add a light either on the trailer or the truck that can provide the extra light needed for the camera.

Edited by unit
Posted

I just spoke with the dealership I purchased from. They said Chevrolet sends a task list with each vehicle and that list directs them to add or remove features based on what packages each vehicle is sold with. He said this vehicle should have had the dark essentials badging added and the camera system activated to include the hitch guidance features and trailer memory features. At the time of purchase I elected not to have the badges changed so the vehicle was not sent to the service dept for the task list to be completed. So my camera is hd but is not activated therefor giving poor picture quality. Bringing it back on Monday and we will see if it's better. I would have thought Chevrolet would have sent the truck with activated options at the time they built it......

Posted

Let us know how that goes.  I have never heard of dealers having that ability so I'm all in to see if they can in fact add the features you want.

Posted

Well, after time at the dealer and speaking with the Chevrolet rep here is what I learned.... 7 months ago Chevrolet canceled the trailer view as part of the hitch guidance package on the HD LT line and reserved it for the High Country and LTZ lines. The advanced trailering package was halted on the LT line because Chevrolet felt they should offer all or nothing. They said this was due to supply constraints. I was told that they have submitted a case file for my truck to Chevrolet to see if they will permit the advanced trailering software to be added even though I don't have the dual camera tailgate handle because the camera isn't used for that software to recognize or store trailer info. They also said that the website states hitch view is a part of the package I have because they plan to resume that on the LT models at some point. They did offer to allow me to upgrade the truck camera package with the power tailgate option for $4700. Not spending that! Certainly disappointed that the info was misleading. Live and learn I guess. 

Posted

My truck was in yesterday and went around with this.  I was told the cameara systems and the head unit(radio) in general have lots of problems in the 21.  I guess a few months back there was an update to these cameras and the dealer was doing it but it would only last a few days or so and then go back, and since then GM has stopped doing any updates. 

 

Dealer was hopeful a new TSB will be out to fix a lot of this stuff.  Told them my brakes suck to and they were expecting a recall or tsb soon much like the 20s had

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   1 Member, 0 Anonymous, 254 Guests (See full list)

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...