Jump to content

Klunk from front end when (sometimes) turning?

Euston
 Share

Recommended Posts

Euston Enthusiast

Euston

Posted
Posted

Hi guys, I've got a 2014 1500 Sierra 61k Miles.

 

I've got a 2" leveling kit on it and 1.5" wheel spacers with stock 20's and K02's. Recently I've been getting a klunk sound from what I think it feels like the steering column? It happens when I turn the steering wheel but not necessarily to full lock and it doesn't happen every time. Maybe 40-50% of the time.

 

I know the OEM Upper Control Arms are more stressed with a leveling kit but I thought 2" leveling kit wouldn't destroy them in within 1500Miles and I'm not going 4x4ing either! The control arms do not making any noise or vibration or DONK* when i tap the breaks at all. during all stages of driving they seem great! So I'm starting to think it's the linkage in the Steering Column?

 

Any thoughts

 

Cheers

lucas287 Enthusiast

lucas287

Posted
Posted

NBS trucks had steering shaft clunk issues so it's possible. But I don't think that's your problem. Put a floor jack under your LCA (under the lower strut bolts or thereabouts) and raise it up until you've got about an inch clearance between the tire and the floor. Insert crow bar and pry while looking for play at your lower ball joints. Mine were shot (stock ride height) at 90k miles. And I mean SHOT - like 4-5 mm's of play. 

Euston Enthusiast

Euston

Posted
  • Author
Posted

Lucas287 Thank you for responding and your input. 

 

I'll have a look when I get a chance. Any tips on checking the steering column? 

 

Thanks 

M1ck3y Senior Enthusiast

M1ck3y

Posted
Posted (edited)
3 hours ago, Euston said:

Lucas287 Thank you for responding and your input. 

 

I'll have a look when I get a chance. Any tips on checking the steering column? 

 

Thanks 

 

Its that big black pipe sticking out of the fire wall, get a hand on it and give it a jerk 😉

 

If it was loose you would feel it all of the time.

Edited by M1ck3y
MichiganCCab Enthusiast

MichiganCCab

Posted
Posted

I remember reading a post quite some time ago where someones truck was missing a mounting bolt for the steering rack.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,949
    Total Members
    8,960
    Most Online
    Gkistler
    Newest Member
    Gkistler
    Joined

  • Who's Online   4 Members, 0 Anonymous, 877 Guests (See full list)

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...