Jump to content

Rough idle at operating engine temp

EpicLT

By EpicLT
in Troubleshooting & Recalls

 Share

Recommended Posts

EpicLT Enthusiast

EpicLT

Posted
Posted

Hey everyone,

 

Tried searching the forums and most topics with these keywords related to transmissions. So maybe a month or 2 ago I changed my oil myself for the first time on this truck (I’ve changed oil myself my whole life, just not for the two free changes I got with the purchase), and since then I am noticing a really rough idle when I am at a stop light. The oil pressure gauge drops significantly, like to 1/4 of the dial at times, and then returns to normal once I depress the accelerator again. This only happens once the truck is at operating temperature - if it is not warm yet, idle stays at a regular oil pressure. I put in the required oil amount and have checked the dipstick (but am willing to do so again). I will look to post a video of the gauge later since I apparently do not have one. 
 

Any thoughts from you all as to what I should look at/try next? I’m not leaking oil - there are zero spots on my garage floor. 

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

Could do a few simple things. Clean the throttle body and MAF sensor. Dump a whole can of seafoam in the fuel tank and even run a can of GDI cleaner through the engine to see if that help at all.

 

Could even pull the spark plugs to check condition of them. A really nice scan tool could help tell you things if you knew what to look for.

  • Like 2
EpicLT Enthusiast

EpicLT

Posted
  • Author
Posted

Thanks. I’ll work on starting on that list to see if anything helps this weekend. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,962
    Total Members
    8,960
    Most Online
    contrabombarde
    Newest Member
    contrabombarde
    Joined

  • Who's Online   3 Members, 0 Anonymous, 1,307 Guests (See full list)

  • Latest Articles

  • Posts

    • richard wysong
      Needing this part.

      By richard wysong · Posted

      Still looks like a rivet to me in the pics, I don't see a nut and none of the pics show the head of the screw. But if you says so.....
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all the help so far!   I did try right from 2026 right down to 2021, and only from 2023 down lets me select the option for tire psi change, but I get the vehicle not supported error!   I'll definitely try it under Chevrolet after work today, and I'll get the sensor number from gm for my truck tire sensors. And I'll let you know if it works for me under Chevrolet!   And if that doesn't work, I'm going to guess that what @Atlas said about maybe I have a different body control module could be true!  
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  
    • bwiese
      Show Us Your 2019 & Up T1 Pictures !

      By bwiese · Posted

      Recently acquired new 2026 Silv. 1500 WT  - L3B + 4WD,  std cab + std bed, in (duh!) Sierra White. Upgrades: replaced 'steelies' w/  Vision "Flow" black alloys,  17x8.5"; HDX nerf bar w/steps (black powdercoat); Weatherguard large/deep alloy saddle toolbox; Michelin fitted bedmat (sale, perfect fit) Weathertech door sill guards TBD: rear wheebox liners 4x black fender arch trim - searching for best  (Putco: chrome only; not looking for flares either!) -Bill    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      True, hard to say what differences there may or may not be between Chev and GM as well as a production year or mid year part change either.    I just found it odd that under the Sierra choice on the Autel that many of the last few years of production year did not include the choice of changing the tire pressure but if that is an Autel thing or a GM thing as to why the choices were not there. Knowing what tpms sensors are on the truck should give some guidance into which choices on the tool even make sense to try as I wouldn't give up just yet with the tool but I guess he will see what if anything he comes up with if he finds out a bit more info and tries a few more things on the Autel. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...