Shorter rear blocks? Looking for 1/2” or so

[WS6FirebirdTA00]

Hi All,

 

I have been searching trying to find some results, but most of what I find are lift spacers for the rear/leaf springs.

 

I removed my rear blocks initially to level the truck. Then I put 5100’s on it and am on the 2nd notch now. It sits higher in the back about 1/2” but the side steps give it the illusion the rear is lower (they actually slope down now).

 

I wanted to install some rear blocks that were about 1/2”. I found some on Summit, but I need to measure the factory blocks to see if they will fit.

 

I wanted to see if you all had any recommendations. Maybe I am using the wrong key words, but I am doing a great job finding 2”+ blocks.

 

I don’t want to go higher in the front and I don’t want to go back to stock height in the rear. Being shorter, it is nice to be able to reach over the tailgate lol

[jscottl]

https://www.summitracing.com/parts/bel-6700/make/chevrolet/model/silverado-1500/year/2017

[WS6FirebirdTA00]

Thanks I will check those out. When I initially looked at those before removing the blocks some folks said they had fitment issues (which is why I was looking at blocks). 
 

 

[WS6FirebirdTA00]

Does anyone know the centering pin diameter for the leaf springs? It is tapered so I am unsure from my block measurement if it is 9/16 or 5/8.

 

Thanks.