Jump to content

Passenger window auto up

Infantrymen1019
 Share

Recommended Posts

Infantrymen1019 Enthusiast

Infantrymen1019

Posted
Posted

I got a drivers side window switch from a LTZ with the passenger side auto up feature. When I installed it, it didn’t work on my RST. Figured it would be plug and play. Anyone know how to get this to work? Or is it too much of a hassle?

Will Jenkins Enthusiast

Will Jenkins

Posted
Posted
44 minutes ago, Infantrymen1019 said:

I got a drivers side window switch from a LTZ with the passenger side auto up feature. When I installed it, it didn’t work on my RST. Figured it would be plug and play. Anyone know how to get this to work? Or is it too much of a hassle?

May have to do with your BCM. I would love to have the auto up feature for the rear windows but Im not sure if thats possible either. 

RandyRck Enthusiast

RandyRck

Posted
Posted

I know it takes more than just the switch ….. I believe you have to have the right actuator or something like that present for the auto up to work. 

Rally6.2RST Enthusiast

Rally6.2RST

Posted
Posted

When I retrofitted memory seats, power fold and mirrors in my 2020 truck I had to use auto up passenger switch but the window regulator has a different connection.  I bought a new regulator and it still didn't work.   My truck now has two passenger window switches.  One is hidden in door trim it controls memory mirrors.  The other switch is my normal switch it controls the window.  So you need switch, harness, regulator motor and BCM programming.  Dont know if custom programming for that has ever been done.  White Automotive Media Services would be the only place that could do it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      PF63 Oil Filters Going Away?

      By Grumpy Bear · Posted

      The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 
    • Tyler Gibbs
      PF63 Oil Filters Going Away?

      By Tyler Gibbs · Posted

      It also depends on what criteria someone is using for “best” when talking filters.  Are we going off best efficiency?   Best quality/QC?  Etc. because the two may not mutually exclusive.  
    • Tyler Gibbs
      PF63 Oil Filters Going Away?

      By Tyler Gibbs · Posted

      They’re not the same wiz as 10-15 years ago.  QC has fallen pretty hard.  The XP line was never good though in the first place.    https://bobistheoilguy.com/forums/threads/wix-filter-rusted-through.386492/post-6991372   https://bobistheoilguy.com/forums/threads/i-ve-used-my-last-wix-filter.27299/   https://bobistheoilguy.com/forums/threads/looking-for-a-better-replacement-for-wix-51258.403977/   https://bobistheoilguy.com/forums/threads/convince-me-in-using-the-purolator-boss.401537/post-7420147   the forums are littered with posts and examples of not great wix filters the last couple years 
    • Atlas
      Joke Thread

      By Atlas · Posted

      *Your      
    • CamGTP
      PF63 Oil Filters Going Away?

      By CamGTP · Posted

      I'd guess that it's because they are Mann-Hummel filters since about 2016, they own Wix and are mostly all made in China now. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...