Jump to content

Light bar mount

Jeffy5044
 Share

Recommended Posts

Jeffy5044 Enthusiast

Jeffy5044

Posted
Posted

I have a 19 RST looking for a light bar mount for the bumper/grill. I found zroadz has one but it's 150 bucks. Is there any others out there or have anyone made ones and can show me what they did. I have a 30 in straight led bar from my old truck I wanna use

Jeffy5044 Enthusiast

Jeffy5044

Posted
  • Author
Posted

Mine has the active shutters and I have a 30 inch double row straight bar. Not sure if that will work for me. I really don't wanna mess with the shutters 

nlindste Enthusiast

nlindste

Posted
Posted
1 minute ago, Jeffy5044 said:

Mine has the active shutters and I have a 30 inch double row straight bar. Not sure if that will work for me. I really don't wanna mess with the shutters 

 

Mine has the active shutters too. From what I have read, if I had picked up a curved bar I wouldn't have had to modify the active shutters.  I only had to trim a little bit on the lowest row of shutter.

 

nlindste Enthusiast

nlindste

Posted
Posted
5 minutes ago, Jeffy5044 said:

You think a double row would fit in there nicely

I am not sure if it would fit, because the bracket lines up perfectly with a spot where one of the tabs clip in, the double row would put the bar in the way of the tab in the center.

nlindste Enthusiast

nlindste

Posted
Posted
3 minutes ago, Jeffy5044 said:

I like the look of it and it's like impossible to steal but I don't think my bar will fit in there

There is definitely no way to get it without ripping the grill off.  Yeah the light that you have I really don't think would fit without major modification.

 

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      I had a similar but different response when I talked to the service manager where I bought my truck in that he said GM corporate won't allow them to lower the placard pressure setting as they would get their hand slapped but that of course they have the ability to make that change. His suggestion was simply go to a tire dealer or third party shop that is willing to reset the pressures lower. However I chose to buy a tpms tool and partly based off of this very forum as it had been proven to work on the 2024 model ( Global B system ) and while I could have paid lots for a full two way diag tool, I didn't want to spend that much and bought the recommended Autel TS 508 and it will reprogram the 2025 model and assume it should do the 2026 as well. However the tool is rather proprietary to reprogramming Autel tpms sensors so that is a function I will never use, where as a real two way scanner would have many uses but also have yearly subscriptions etc where this 508 is free updates for as long as they put updates out for the unit. In any event it worked to lower the placard pressures and I often use it to adjust my actual tire pressures although will check with a mechanical gauge as well sometimes just to make sure that tires tpms sensor isn't lying to me.    My suggestion is either buy a tool that you know will work to adjust the system or start out by getting the tire shop you bought your tires from to reset your truck and if after that you still want a unit to do it yourself, get one at that point. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Here is an image of a quick Google search about these tires on my truck and it's exactly same psi recommendation the Toyo tires company gave me!    I'm not looking for anyone else recommended psi or anything, I'm just looking to see if anyone knew a way to get rid of the factory low psi warning light, because I'm not running high psi and ruining my tires when I'm not towing! 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      60psi front and 80psi rear But I am not running the factory tire brand or size! it's load range F Toyo tires
    • newdude
      Tire psi

      By newdude · Posted

      Open the driver's door jamb.  What do the cold tire PSI ratings on the tire placard show?   I'm not saying to run it to those numbers, but I would like to know what it says.      

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...