Jump to content

Wrap

goat226

By goat226
in Troubleshooting, Warranty & Recalls

 Share

Recommended Posts

goat226 Enthusiast

goat226

Posted
Posted

Good afternoon all. 

I want to wrap my mirrors on my 2021 gmc 1500 at4. My truck is satin gray metallic. Would any of you tell me what's the best brand of wrap and color code to match my truck. Thanks in advance. Ed

  • 2 weeks later...
TitoGoldner New Member

TitoGoldner

Posted
Posted (edited)

A few suggested mirror wrap brands that you can refer:

3M: 3M is a well-known brand in the automotive industry and offers a range of vinyl wrap products, including mirror wraps. They have a wide selection of colors and finishes to choose from.

Avery Dennison: Avery Dennison is another popular brand that provides vinyl wrap solutions. They offer various mirror wrap options in different colors and textures.

Vvivid Vinyl: Vvivid Vinyl is known for its affordable and easy-to-install vinyl wrap products. They offer a range of colors, including metallic finishes, which may be suitable for matching a metallic satin gray truck. mr mine

Typically, mirror wraps in shades of silver, gunmetal gray, or charcoal gray can complement metallic satin gray vehicles. It's always a good idea to obtain physical samples or swatches of different mirror wrap colors to compare and see which one closely matches the shade of your truck's exterior.

Edited by TitoGoldner

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Coastie05
      2027 GMC Sierra: Official Discussion

      By Coastie05 · Posted

      Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Jsdirt
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By Jsdirt · Posted

      Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • davester
      OBD not ready?

      By davester · Posted

      Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...