Jump to content

adding strobes & work lights

bikernut
 Share

Recommended Posts

bikernut Enthusiast

bikernut

Posted
Posted

adding a headache rack with strobes & work lights to my 2016 Silverado 2500hd WT. I have gotten a upfitter switch panel and the added wires for it. Now it says these added wires are for grounding the item I want to add so where do I ground these to when adding the lite(s). Where does the switch get its power from and how to I wire the added items? I found something about a relay under the hood in electrical panel don't understand this so can someone give me precise wiring directions as I don't want to burn down my vehicle?? thanks all

DJG Enthusiast

DJG

Posted
Posted

It seems that you might be in a little over your head. The best would be to use a relay for each light or set of lights. Use the grounding switch to ground and operate the relay. Supply the power to the relay from the accessory wiring. The relay will provide the power for the lights. Get that power directly from the battery with a suitable fuse. If you don’t understand how to use relays it would be best to go onto a forum that will give you the lessons or have someone knowledgeable to do it for you. It can be a little confusing at first. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • TrueBlue
      Brake Pad Warning Message

      By TrueBlue · Posted

      I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • SwitchBladeSierra
      Heated steering wheel

      By SwitchBladeSierra · Posted

      I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  
    • Vu1can
      Brake Pad Warning Message

      By Vu1can · Posted

      Checked the pads today and there's plenty of meat on them. If the message keeps coming up, I'll just answer YES that the pads were replaced and wait for the squeal.
    • richard wysong
      p0449, p0446, p0451 Evap codes

      By richard wysong · Posted

      Welcome to the Forum! Always post the code definitions along with the codes. there are over 18000 possible codes, no one remembers them all and most will skip over your post rather than look them up

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...