Jump to content

L5P Android Auto Gauge app

mkirkland
 Share

Recommended Posts

mkirkland Enthusiast

mkirkland

Posted
Posted

Hey guys, wanted to just share something that ive been working on for the last couple weeks. I got my 2026 Silverado 2500 with the 6.6L Duramax. I previously came from a 2020 3500 with the 6.6L Gas motor. So far im loving the new truck and the Duramax. I wanted to get the iDash Pro for the truck but with the gauge and the pod, man it was pretty much over $600 after shipping. So instead i decided to try to build my own application that could display similar data on the trucks nice infotainment screen. There is tons more real estate there anyways. So thats what ive done. 

I bought the OBDLink MX+ to get data off the OBD-II CAN bus. I bought a small ESP32 dev board to interface with the OBDLink, and then i built an Android Auto app that i installed on the truck through a private Google Play release.

So far everything is working great. Im still very heavily developing the software so there are lots of things i want to implement, but here is a screenshot of the screen so far. I have configuration screens and some other data that is not in the screenshot but this is the main area. I think im going to redo the way these gauges are shown and put more of the large gauges up instead of the 4 that i have now, with the smaller ones below. Has anyone done anything similar? Sorry for the finger prints all over the screen... ill get some better images later

screenshot.jpg

  • Like 5
  • 2 weeks later...
mammut Enthusiast

mammut

Posted
Posted

Love it and look forward to further development.  I am using a generic Bluetooth ODB2 module with ODB Fusion in CarPlay. It works but it would be awesome to have a native app.

 

Let me know if I can help with testing or another set of eyes.

  • Like 1
mkirkland Enthusiast

mkirkland

Posted
  • Author
Posted

@mammut so right now I have it hardcoded to work with the obdlink mx+ so I'm not sure it will work with your obd-ii plug. It also needs an esp32 microcontroller to talk between the obdlink and the truck via Bluetooth. 

 

I would really like to build out my own obd plug that does all this in one chip

mkirkland Enthusiast

mkirkland

Posted
  • Author
Posted

Here is a better screenshot, ill try to get some video for this soon. The GM AAOS is heavily restricted and i have to find all kinds of work arounds.

 

image.thumb.jpeg.d579f13469f23c85be4630ebdae5f722.jpeg

  • 2 weeks later...
mkirkland Enthusiast

mkirkland

Posted
  • Author
Posted

So using some other open source obd-ii project i was able to completely get rid of the obdlink mx+ and the intermediate esp32 controller and have a single obd-ii plug that handles all the CAN bus messaging and the BLE communication back to the trucks AAOS system

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • davester
      Bench seat swap for 2021-2024 suburban

      By davester · Posted

      probably won't get a response from that user, as they haven't returned to the site since making that one post.  users don't (at least I don't, and I haven't seen any setting which would notify me via say, email) get any notification other than going to this site, and checking if they got a response on their thread...
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks - I wasn't quite caffeinated this morning. 2:1 makes sense, turning the crankshaft 360 degrees will turn the cam 180 degrees, and had I done that, the cam's dot would be at 6 and the crank's at 12 again.   I went ahead and took the sprocket off anyway, aligned everything dot-to-dot including the balance shaft just for s&g. I'm glad I did because I discovered no Loctite on the timing sprocket bolts. Maybe it's not required, but at only 20 ft-lb torque spec, those bolts aren't in there very tight. Cleaned and reassembled with some thread locker and torqued.   A general observation: Less is more with RTV. If a little doesn't stop a leak, a LOT probably won't, either. RTV is thinly veiled revenge, in a tube...      
    • richard wysong
      Wow I'm in a pickle. (Broke down truck) and a story.

      By richard wysong · Posted

      The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • Grumpy Bear
      PF63 Oil Filters Going Away?

      By Grumpy Bear · Posted

      The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...