Jump to content

Disabling DRLs?

MuranoSE

Recommended Posts

MuranoSE Enthusiast

MuranoSE

Posted
Posted

Is there anyway to disable the DRL's on an 04 Bravada/Envoy/Trailblazer? Here in Canada they are required by law, but I am doing an HID conversion and need to disable the DRLs. If someone can help me out that would be awesome. There is no specific fuse for the DRLs ether.

BBSilverado Enthusiast

BBSilverado

Posted
Posted
Is there anyway to disable the DRL's on an 04 Bravada/Envoy/Trailblazer?  Here in Canada they are required by law, but I am doing an HID conversion and need to disable the DRLs.  If someone can help me out that would be awesome.  There is no specific fuse for the DRLs ether.

 

 

 

 

There is a relay in the box under the hood that can be removed but I'm not sure if the export models are the same, but you could look.

MuranoSE Enthusiast

MuranoSE

Posted
  • Author
Posted

Ahh s**t I just bought them, but have NEVER used Ebay before and I just noticed that he only ships to US, and I am in Canada, am i screwed?

 

Shipper and I are working out the details. Hopefully I will have this by next week. :D

blue2kzr2 Enthusiast

blue2kzr2

Posted
Posted

If DRLs are required, won't it be ILLEGAL to disable them? The seller could be in trouble for selling to someone in Canada, that could be the reasoning for US-only shipping.

MuranoSE Enthusiast

MuranoSE

Posted
  • Author
Posted
If DRLs are required, won't it be ILLEGAL to disable them?  The seller could be in trouble for selling to someone in Canada, that could be the reasoning for US-only shipping.

 

 

 

 

 

Shhhh, besides I live in Winnipeg and the PoPo up here have no clue.

Envoy Fan Enthusiast

Envoy Fan

Posted
Posted

A lot of Ebay sellers just don't want to fool with shipping outside of the U.S. Customs, etc. is too much of a hassle for many who just sell out of their basement or garage. Just don't use UPS for Canadian shipment, heard Canada puts some kind of tax on item that often doubles the price. I have heard that you just use the U.S. Mail to ship small items and no problem. I have not personally tried this though.

MuranoSE Enthusiast

MuranoSE

Posted
  • Author
Posted
A lot of Ebay sellers just  don't want to fool with shipping outside of the U.S. Customs, etc. is too much of a hassle for many who just sell out of their basement or garage.  Just don't use UPS for Canadian shipment, heard Canada puts  some kind of tax on item that often doubles the price. I have heard that you just use the U.S. Mail to ship small items and no problem. I have not personally tried this though.

 

 

 

 

 

Yeah we arrange FedEx shipping.

 

Also on my Bravada when I press the dome overide button 4 times my DRLs do not shutoff, is this normal? Or are they supposed to shut off?

01silverado2500 Enthusiast

01silverado2500

Posted
Posted

Once your DRLs come on just take and turn your headlight switch to the far left off position and that will shut the DRLs off, the dome override trick applies to the 2000-2001 models i think.

  • 6 months later...
bravy02 New Member

bravy02

Posted
Posted
Hmm does the Headlight Drive Module sound right?

 

 

 

 

If you physically remove the HDM from the underhood fuse center it completely disables the low beams entirely. They will not work what so ever. I didn't try the high beams.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,731
    Total Members
    8,960
    Most Online
    DjmFingerstylePlayer
    Newest Member
    DjmFingerstylePlayer
    Joined

  • Who's Online   4 Members, 0 Anonymous, 618 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      The not as clean as one would assume theme with the new engine oil, that reminds me of comments over the years with mechanics not always being so on board with filling an oil filter, not from the center anyway due to that typically being the clean side of the filter, danger of some contaminant falling into the filter if not careful but the realization now that the oil may not be as pure as one had assumed it would surely be. Yes it would be possible to fill from the small holes but that means messing with something to prop open the anti drain back valve if the filter is so equipped and not damage that valve in the process. Me, I have hardly ever prefilled an engine oil filter however I have prefilled diesel fuel filters with a filter on a fuel bulk tank and for anyone that has messed with diesel engines with filters and units that have a limited or no way of priming them, putting on a dry filter is a bad day to say the least with those crappy systems. But anyway back to not so clean engine oil, indeed perhaps its not so bad after all that I have not made a practice of prefilling oil filters.    As Grumpy Bear commented on keeping things clean, that I really have to wonder what the typical practice is at a dealer or any other shop that changes engine oil, do they make sure to wipe or wash off the oil plug and certainly if it fell into some gunk or onto a dirty floor, or that they wiped the filter mounting flange and didn't go and use some dirty rag and end up adding dirt to the inside of the head of the filter mount. Or be careless in how they stored or handled the new filter and if they were bumping into items under the vehicle with the filter opening facing up and having dirt drop right into the filter and if so right into the threaded center that is on the clean side. The top side, did they clean away the built up gunk that may be around the filler before removing the cap or to be really careful at that point that something right close to the filler hole that was hidden under the caps flange won't fall into the engine. Or did they clean the funnel or was that just laying there covered in oil from the oil change before and dust kicked up from sweeping the floor stuck to the oil and now that will go running into the next persons engine due to just not cleaning the funnel as "they won't know anyway" attitude as that young guy is more worried about taking a break so he can go outside and smoke a joint. Just random points that came to mind when I think about what some hired personnel may do that the shop foreman has no idea of or perhaps the whole attitude of some shops may be "eh ... who cares, they will never know the difference anyway".  
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      $3.69 for 87 octane.   $4.24 for Diesel in town.
    • Atlas
      OCI, not when but why?

      By Atlas · Posted

      On the subject of OLM, Gm's OLM tool may be more "informed" than others brands. I recall OLM's in mid-2000's Chrysler products literally counting down a set number of miles. That's all the OLM appeared to be.    I would actually expect GM to be able to explain the parameters that their OLM takes into account from a high level. No, I would not expect them to disclose their software coding or data analysis around their parameters.   So we're talking about two different topics, so to continue the subject on the other one, I'd be curious to know how much "standard particulate matter" in fresh oil is able to be filtered at first start by a fresh oil filter. How much particulate matter is enough to "matter"?   I.e. how much of a "lever" do we think this equates to (variability in particulate content, in fresh oils, between different makes/brands, some which filter less, and some that filter more).   We can say that more particles = more wear = shorter engine life as a logical statement and use that data with a little marketing to scare people into selecting a more refined/filtered oil. Using a similie, is this like deciding to forego two alcoholic drinks in a lifetime because we're worried about the potential impact on lifespan? Are there numbers which translate the ISO test results into a quantifiable increase in wear for a given engine/use case?
    • chris21
      Brand new to this forum. Questions about re-gearing my 26’ HD

      By chris21 · Posted

      I'm pretty sure it doesn't actually recalibrate the speedometer it just changes the wheel speed sensor inputs to the computer. The truck still thinks it has stock tires.
    • asilverblazer
      OCI, not when but why?

      By asilverblazer · Posted

      I apologize, I missed this post, at risk of going off CURRENT TOPIC.   I'm not saying it is BS, I'm questioning how much information is being held back. GM is NOT going to spell out exactly every parameter in the algorithm. Liability, intellectual property, etc.    I'm not naive enough to believe that it is as simple as revolutions, coolant temperature, miles, time; are you?    I don't do irrational either, and boiling the OLM down to four simple values that I could code in an afternoon (I'm not a coder) is irrational - unless it suits your agenda to ignore it. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...