Jump to content

New grille combo on!

Lucky13MN

By Lucky13MN
in Hobbies, Tech & Outdoors

Recommended Posts

Lucky13MN Enthusiast

Lucky13MN

Posted
  • Author
Posted

Thanks!

 

Grille was kind of free, just painted my stock chrome one... been that way for a couple years now. I just touch it up now and then (maybe once a year or so). The insert was $161 shipped.

Lucky13MN Enthusiast

Lucky13MN

Posted
  • Author
Posted

I painted the whole thing...

 

I used Krylon Fusion believe it or not, worked out really well and for about $4 a can I can touch it up once a year, which is all that it really needs. Only takes about 15 minutes to get it all ready, paint dries in 15... From start to finish it's ready for the road in about an hour, but I usually let it sit overnight just to really let it dry good.

 

The only part I ever need to touch up is the crossbar piece, the rest is just fine where there wasn't any chrome.

 

I might get an all black grille eventually, but for now this way doesn't bother me.

smooth68 Enthusiast

smooth68

Posted
Posted
The only part I ever need to touch up is the crossbar piece, the rest is just fine where there wasn't any chrome.

 

 

 

 

 

That's what worries me - the GMC is all chrome! :cheers:

 

Your truck is onyx black ?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      2020 Trailboss 6.2 replacement

      By newdude · Posted

      Correct.  2019-2021 model years are serviced by a different p/n.  19420611.  Recall 2021s use 19420611.   The recall engines 2022-2024 model years are serviced with 12740076.     The difference between 19420611 and 12740076 is GM changed injector size for 2022.  The injectors are smaller on 12740076 with smaller injector bores in the cylinder heads to match the smaller injectors.  So you can't install a 19420611 in a 2022-2024, and you can't install a 12740076 in a 2019-2021.     Both engines are the replacement engine p/ns that are in the L87 recall.  So both of these are the updated engines.      
    • 2017Z
      2020 Trailboss 6.2 replacement

      By 2017Z · Posted

      Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • GN2018
      AFM Disabler Question

      By GN2018 · Posted

      Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
    • davester
      Wiring Help, Please

      By davester · Posted

      you might read through the info on gmupfitter.com for your truck, to find a good power source.
    • Grumpy Bear
      AFM Disabler Question

      By Grumpy Bear · Posted

      Melling I believe is/was the OEM on the lifters who explored this problem some years ago. The white paper they generated on the topic indicated two items of note when I read it. 1.) They only fail on the switch. Prevent the switch, prevent the failure. 2.) The majority fail due to deposits messing up the timing of that switch. Anyway that's what I got from it.    Mine have always been active, 195K+ now, and my oil maintenance is surgically clean.    Of course this assumes good parts. That is no heat treat issue or machining flaws. I get comfortable that these issues are in the rearview mirror by about 30K. IMHO naturally. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...