Jump to content

Power Window Motor

By Black-Z71
October 23, 2006 in 1999-2013 Silverado 1500 & Sierra 1500

Recommended Posts

Enthusiast

Black-Z71

Posted October 23, 2006

Posted October 23, 2006

Lately my driver's side window takes a very long time to roll up. Is it the motor that is going? The switch appears to be functioning properly, but I have not checked voltage at the motor yet. Also, can I just replace the motor without taking the whole track out, or is it better to replace the entire thing. Just wanted to get some opinions...

svensk

Senior Enthusiast

svensk

Posted October 23, 2006

Posted October 23, 2006

We all experience that. This is really common with mature GM trucks. Mine is a 2000, and it has been slow going up forever now.

Enthusiast

Black-Z71

Posted October 23, 2006

Author

Posted October 23, 2006

We all experience that. This is really common with mature GM trucks. Mine is a 2000, and it has been slow going up forever now.

<{POST_SNAPBACK}>

So does that mean that the motor is not going?

svensk

Senior Enthusiast

svensk

Posted October 23, 2006

Posted October 23, 2006

I'm sure it will eventually crap out. Just not anytime soon.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

Recently Browsing 0 members
- No registered users viewing this page.
Forum Statistics

250.3k
Total Topics

2.7m
Total Posts
Member Statistics

342,687
Total Members

8,960
Most Online

Newest Member
3CarSeatDad
Joined 4 hours ago
Who's Online 4 Members, 0 Anonymous, 745 Guests (See full list)
- yofxr
- KARNUT
- PunchT37
- BuckWallace

Latest Articles
- GM Recalls 2,700+ Trucks For Airbags That Can Explode While Parked – How To Check Your VIN
  Wednesday at 07:54 PM
- You Can Completely Disable A New Chevy Traverse By Bending The Rear Wiper Arm (No, Seriously)
  Wednesday at 05:47 PM
- Should You Use Engine Fuel Additives In Chevy or GMC? Here’s GM’s Official Statement.
  Wednesday at 02:38 PM
- We’ve Driven the Edition 1 For 4 Years. Here’s Why the Mid-Size HUMMER X Concept is Exactly What GMC Needs.
  May 29
Posts
- Shopping for new truck and have question.
  
  By Another JR · Posted 40 minutes ago
  
  The 6L90 in the 2020+ trucks has several improvements over the 6L90 in other trucks, so the comments made about issues with previous versions may not apply. I have been totally happy with the 6L90 in my 2021 3500 HD. The L8T has plenty of torque over a wide speed range and does not need to be held in a narrow rpm range unless you are towing near the maximum weight. Even then, six gears works just fine. Personally I don’t like what i consider the excessive shifting of most ten speeds, but i have not towed with one of these trucks with a ten speed. If you are buying used I would prioritize condition, miles, maintenance records, absence of stupid unreversible modifications, and towing history as more important than ten speed versus six speed. Make sure you try the seats out before choosing a trim level. I can drive my SLT with the leather bucket seat (premium pkg) option for 8 hours and get out feeling fine. I was uncomfortable in the SLE cloth seats with fold down center seat by the end of a 20 minute test drive. My wife loves the SLT leather bucket seats, too.
- Gas Prices
  
  By PhilB · Posted 1 hour ago
  
  Gas at the gas stations in Villa Ridge, MO. This is right along I-44 in Franklin Co MO. BP $3.69/reg $4.09/prem $4.55/diesel Mr Fuel truck stop $3.69/reg $4.39/prem
- I need some help with GOOD quality replacement headlight lenses
  
  By lryfer · Posted 1 hour ago
  
  thank you. need to get full assemblies not just the LED bulbs.
- Android Auto not connecting
  
  By Z45 · Posted 1 hour ago
  
  Have you updated the phone version? I had that issue when I first got truck and updating the phone fixed that.
- LZ0 P06DD Code - Not Thrust Bearing Related
  
  By coreydkoster · Posted 1 hour ago
  
  I bought my '26 Sierra Denali 1500 LZ0 about two weeks ago. Thursday, at 500 miles, I got the "Reduced Acceleration" message on the DIC along with the CEL on the dash. Limped it 13 miles home. I did not notice any unusual noises. I was only able to pull one code with my scanner, P06DD. Had it towed to the dealer. They are saying that the the crankshaft end play is within spec and there is no excessive metal in the oil. They will be replacing the oil control valve solenoid. Has anyone had or heard about this issue and it was not related to thrust bearing failure? I'm just wondering what to expect after the repair and what to look out for. I have attached a link to the video from the dealer repair tech. https://youtube.com/shorts/FW_QBxnNm5A
GM-Trucks.com Clubs
- Black Truck Club
  
  Open Club · 612 members
- White Truck Club
  
  Open Club · 380 members
- Canadian Owners Club
  
  Open Club · 282 members
- Red Truck Club
  
  Open Club · 156 members
- diesel 3.0
  
  Open Club · 279 members
- Texas Owner's Group
  
  Open Club · 371 members
- NorthSky Blue Club
  
  Open Club · 118 members
- Midwest Owner's Group
  
  Open Club · 212 members
- 2015 Custom Sport Club
  
  Open Club · 5 members
- GM Snow Plowing Club HD
  
  Closed Club · 14 members
Popular Contributors
- Week
- Month
- Year
- All Time
1. 1
  
  KARNUT
  26
2. 2
  
  Atlas
  19
3. 3
  
  Grumpy Bear
  9
4. 4
  
  diyer2
  7
5. 5
  
  Chuck FB
  6
Show More

×

Forums
Main Site
Newsroom
Road Tests
Clubs
Gallery
Activity
- Back
- All Activity
- Search
Tools
More
- Back
- Guidelines
- Staff
- Leaderboard
- Online Users

×

Create New...