Jump to content

How Old Are Your Tires...?

onac255

Recommended Posts

VMax2007 Senior Enthusiast

VMax2007

Posted
Posted
Sorry didn't know it had already been posted.

 

Well dammit, you would have if you were a Post Whore like the rest of us.....ok, some of us. Now get with the program, will ya? :D

compulynx Enthusiast

compulynx

Posted
Posted

Funny this post came up. I just had a 2002 Goodyear marathon tire on my boat trailer peel off the tread and blow out last sunday. The had almost full tread on them.

 

The tire was fully aired up(checked it before I left that day), and hit nothing, just going down the road at about 60 mph and boom....

 

I guess the 6 year is a magic number to get rid of your tires.

 

I put a new set of tires on the trailer, and made note of the tire mfg date, which was 2008.

 

 

C

ricko2 Enthusiast

ricko2

Posted
Posted

I work at a tire store. I HATE it when stuff like this comes out. It always says "YOU WILL DIE" and shows the same pictures of the wrecked Ford Explorers we saw ten years ago when Firestone took the hit for a crappy Ford car design. Now everyone is calling and coming in to check the #'s on their tires, and "make sure I don't get the old ones!" when they buy tires. Just a pain in my a$$. Thats all. Rant over. Happy trails everyone, and make sure your tires are safe. Proper air pressure always helps...

Zembonez Senior Enthusiast

Zembonez

Posted
Posted
I work at a tire store. I HATE it when stuff like this comes out. It always says "YOU WILL DIE" and shows the same pictures of the wrecked Ford Explorers we saw ten years ago when Firestone took the hit for a crappy Ford car design. Now everyone is calling and coming in to check the #'s on their tires, and "make sure I don't get the old ones!" when they buy tires. Just a pain in my a$$. Thats all. Rant over. Happy trails everyone, and make sure your tires are safe. Proper air pressure always helps...

Yeah... typical media bullshit. Very few facts and a lot of fear tactics. They should be ashamed.

onac255 Senior Enthusiast

onac255

Posted
  • Author
Posted

Lol yeah I agree its a little over bored but I had no clue tires that were 12 years old were still being sold in stores...

zxcv Enthusiast

zxcv

Posted
Posted

I didn't need any newspost to tell me the stock tires on my truck are junk. One winter with them and I knew. Hopefully they wear out soon and I can get a set of BFG's!

iscsidude Enthusiast

iscsidude

Posted
Posted
I work at a tire store. I HATE it when stuff like this comes out. It always says "YOU WILL DIE" and shows the same pictures of the wrecked Ford Explorers we saw ten years ago when Firestone took the hit for a crappy Ford car design.

 

 

I thought they were Ford Exploders :puke:

Zembonez Senior Enthusiast

Zembonez

Posted
Posted
I work at a tire store. I HATE it when stuff like this comes out. It always says "YOU WILL DIE" and shows the same pictures of the wrecked Ford Explorers we saw ten years ago when Firestone took the hit for a crappy Ford car design.

 

 

I thought they were Ford Exploders :puke:

 

I have 140K on my company car Explorer... and while I am no Ford fan, there is nothing unstable about the handling at all. It's as stable as any SUV I've ever driven... chalk another one up to idiots that don't know how to drive. You could blow out a tire on a tricycle and these morons would crash and burn.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,739
    Total Members
    8,960
    Most Online
    chfkief
    Newest Member
    chfkief
    Joined

  • Who's Online   2 Members, 0 Anonymous, 1,401 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      Joke Thread

      By Chuck FB · Posted

      Fred was in the fertilized egg business. He had several hundred young pullets, and ten roosters to fertilize the eggs He kept records, and any rooster not performing went into the soup pot and was replaced. This took a lot of time, so he bought some tiny bells and attached them to his roosters. Each bell had a different tone, so he could tell from a distance, which rooster was performing. Now, he could sit on the porch and fill out an efficiency report by just listening to the bells. Fred's favourite rooster, old Butch, was a very fine specimen, but this morning he noticed old Butch's bell hadn't rung at all! When he went to investigate, he saw the other roosters were busy chasing pullets, bells-a-ringing, but the pullets, hearing the roosters coming, would run for cover. To Fred's amazement, old Butch had his bell in his beak, so it couldn't ring. He'd sneak up on a pullet, do his job and walk on to the next one. Fred was so proud of old Butch, he entered him in the City Show and he became an overnight sensation among the judges. The result was the judges not only awarded old Butch the "No Bell Piece Prize," but they also awarded him the "Pulletsurprise" as well. Clearly old Butch was a politician in the making. Who else but a politician could figure out how to win two of the most coveted awards on our planet by being the best at sneaking up on the unsuspecting populace and screwing them when they weren't paying attention. Vote carefully in the next election, you can't always hear the bells.
    • chfkief
      FS: Black Bear Performance AutoCal Tuning System

      By chfkief · Posted

      Do you still have?
    • 3CarSeatDad
      High Country Suburban build confirmation

      By 3CarSeatDad · Posted

      Can someone confirm if the GM order workbench terminal is able to validate a custom build sequence:   1) Initialize the Allocation Base: Open a new vehicle build queue, select the 2026 Chevrolet Suburban 4WD, and pick the High Country (3LZ Preferred Equipment Group).   2) Select the Diesel Powertrain: Go directly to the engine configuration screen and choose RPO code LZ0 (3.0L Duramax Turbo-Diesel). Ensure it maps to the MHS 10-speed automatic transmission.   3) Deploy the Seating Swap: Navigate to the Interior Options screen and enter RPO code ATT to replace the standard captain's chairs with the power-release 60/40 bench seat. Because you are not trying to force a separate luxury or air-suspension bundle, the standard, premium D07 Fixed Floor Console remains active. The system will accept this change immediately without triggering a warning message.   3)Apply Heavy-Duty Hauling Capability: Input RPO code NHT (Max Trailering Package). The commercial terminal will automatically bundle the required trailering hardware and software modules to support the diesel engine's maximum towing capacity.   5) Layer the Premium Tech and Glass: Separately add code C3U (Panoramic Power Sunroof) and code UKL (Super Cruise) to the order screen.   6) Run the Final Validation: Click the "Validate Order" button at the bottom of the interface.
    • revmanii
      Looking at ordering a '26 WT because I want a std cab, std bed

      By revmanii · Posted

      Spent the last hour or 2 googling and reading up on the spacer thing. I don't like the loss of thread contact on the slip on spacers, but it appears you can get "extended" lug nuts that reach into the hole of the wheel to get back the lost threads. Looks like the only true hubcentric slip on spacers are at least .375". I'd want as little as I could get away with and don't want to cause other clearance issues going any thicker. Bora seems to offer what appears to be a well made .375" spacer and extended lug nuts. I searched here and did find a couple threads recommending Bora. But not cheap. By the time I buy spacers and lugs, new TPMS sensors, then pay a tire shop to install the new sensors, I suspect I'm going to be in over $400. Thinking about running out and getting some washers to put behind the wheel to see if .375" is enough to clear calipers, turn lock to lock without rubbing, and to see if the wheels/tires look strange pushed out a little. This would just be to check fitment.
    • Core-Lokt
      Road Master Active Suspension

      By Core-Lokt · Posted

      Roadmaster makes some quality parts; I have their sway bar. I considered the RAS, but I ended up bagging. I didn't know what kind of ride I'd get with RAS, and the bags have interior jounce bumpers, so I can run 0 pounds pressure. I figured I'd have the best of normal suspension ride with assist on-demand. But it seems you got pretty much the same in one item.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...