Remote Entry Issue

[ch00sen1]

It all worked, then I had a loose connection on my battery. After that the remote alarm works but not the lock/unlock. Any ideas?

[jrrod2004]

It all worked, then I had a loose connection on my battery. After that the remote alarm works but not the lock/unlock. Any ideas?

 

 

Resync the remote:

 

In order to resynchronize the transmitter with the PDM, perform the following steps:

 

 

Stand within 1.5 meters (5 ft) from the vehicle.

Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7 seconds.The door locks should cycle in order to confirm resynchronization.

[ch00sen1]

It all worked, then I had a loose connection on my battery. After that the remote alarm works but not the lock/unlock. Any ideas?

 

 

Resync the remote:

 

In order to resynchronize the transmitter with the PDM, perform the following steps:

 

 

Stand within 1.5 meters (5 ft) from the vehicle.

Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7 seconds.The door locks should cycle in order to confirm resynchronization.

 

 

 

THANK YOU! That's awesome!