Jump to content

Uss New York


grampadirt

Recommended Posts

Posted

The US Navy had a ship built recently using some of the recycled steel from the Twin Towers.If you look at the bow area you can see a little difference in the color...I thought that was a great idea.

 

ussnewyork.jpg

 

now hopefully they'll use it to go whoop the terrorists FTW

Posted

that's pretty damn cool. here's an excerpt from www.ussnewyork.com:

 

Casting the Bow Stem

Steel salvaged from the World Trade Center wreckage has been used in the construction of New York. The shipyard and Navy inspected the steel and found that it was of sufficient material strength so that it could be incorporated into the bow stem of New York.

 

"We're very proud that the twisted steel from the World Trade Center towers will soon be used to forge an even strong national defense," said New York Gov. George Pataki. "The USS New York will soon be defending freedom and combating terrorism around the globe, while also ensuring that the world never forgets the evil attacks of September 11, 2001 and the courage and strength New Yorkers showed in response to terror."

 

On 4 August 2005, the LPD 21's bow stem with its World Trade Center steel was erected into the main hull and will forever lead the future USS New York. The complete bow was erected into place in March 2006.

Posted
that's pretty damn cool. here's an excerpt from www.ussnewyork.com:

 

Casting the Bow Stem

Steel salvaged from the World Trade Center wreckage has been used in the construction of New York. The shipyard and Navy inspected the steel and found that it was of sufficient material strength so that it could be incorporated into the bow stem of New York.

 

"We're very proud that the twisted steel from the World Trade Center towers will soon be used to forge an even strong national defense," said New York Gov. George Pataki. "The USS New York will soon be defending freedom and combating terrorism around the globe, while also ensuring that the world never forgets the evil attacks of September 11, 2001 and the courage and strength New Yorkers showed in response to terror."

 

On 4 August 2005, the LPD 21's bow stem with its World Trade Center steel was erected into the main hull and will forever lead the future USS New York. The complete bow was erected into place in March 2006.

 

 

 

 

I remember reading that somewhere,glad you found it. :) I was stationed on the USS Denver LPD 9,in 1969 and am a plank owner.What's a plank owner?,check this out:

USN plank owners

Posted

I remember hearing about this a while ago but I wasnt sure if it was true or not. What a great feeling that must be to sail on that ship! Thanks for sharing Gramps!

Posted
I remember hearing about this a while ago but I wasnt sure if it was true or not. What a great feeling that must be to sail on that ship! Thanks for sharing Gramps!

 

 

Especially if you lost someone in that disaster

Posted
Propulsion:

 

Diesel Engines 4 Colt-Pielstick 2.5 STC (10,400hp each)

 

That's BEFORE Justin get's his hands on them. :)

 

 

does he pay you for every time you say his name or something? lol you throw his name out a lot

Posted
Propulsion:

 

Diesel Engines 4 Colt-Pielstick 2.5 STC (10,400hp each)

 

That's BEFORE Justin get's his hands on them. :P

 

 

does he pay you for every time you say his name or something? lol you throw his name out a lot

 

 

It was a JOKE! :)

Posted

I think theyre going to make 3 others

 

 

"On 9 September 2004, the Secretary of the Navy announced that two of her sister ships will be named Arlington and Somerset, in commemoration of the places two of the other planes used in the attack came down: Somerset County, Pennsylvania and Arlington, Virginia."

 

Perhaps the most striking feature of the USS New York’s makeup is the approximately 24 tons of steel from the World Trade Center used in her construction. Scrap metal from the center, destroyed during the 9/11 attacks of 2001, was melted down to make the bow of the hull. The ship’s motto, fittingly enough, is “Never Forget.”

 

It was welcome news as we approached the seventh anniversary of 9/11, which is for me usually a season of frustration — an annual reminder of the misdirected follies in Iraq and our failure to apprehend Osama bin Laden. It’s not only a ship of war, but a vessel symbolizing for the world our resolve and tenacity. It’s a reassuring reminder of this country’s strength of character, a demonstration of our ability to, quite literally, pick up the pieces and renew the fight.

 

A Navy captain at the scene later told the media that when the melted metal was poured into the moulds for the ship’s bow section, “those big rough steelworkers treated it with total reverence.”

 

“It sounds trite, but I saw it in their eyes,” added Philip Teel, head of the ship systems division for Northrop Grumman, the company that built the ship. “These are very patriotic people, and the fact that the ship has steel from the trade center is a source of great pride. They view it as something incredibly special. They’re building it for the nation.’ Wikipedia.com

Posted
I think theyre going to make 3 others

 

 

"On 9 September 2004, the Secretary of the Navy announced that two of her sister ships will be named Arlington and Somerset, in commemoration of the places two of the other planes used in the attack came down: Somerset County, Pennsylvania and Arlington, Virginia."

 

Perhaps the most striking feature of the USS New York's makeup is the approximately 24 tons of steel from the World Trade Center used in her construction. Scrap metal from the center, destroyed during the 9/11 attacks of 2001, was melted down to make the bow of the hull. The ship's motto, fittingly enough, is "Never Forget."

 

It was welcome news as we approached the seventh anniversary of 9/11, which is for me usually a season of frustration — an annual reminder of the misdirected follies in Iraq and our failure to apprehend Osama bin Laden. It's not only a ship of war, but a vessel symbolizing for the world our resolve and tenacity. It's a reassuring reminder of this country's strength of character, a demonstration of our ability to, quite literally, pick up the pieces and renew the fight.

 

A Navy captain at the scene later told the media that when the melted metal was poured into the moulds for the ship's bow section, "those big rough steelworkers treated it with total reverence."

 

"It sounds trite, but I saw it in their eyes," added Philip Teel, head of the ship systems division for Northrop Grumman, the company that built the ship. "These are very patriotic people, and the fact that the ship has steel from the trade center is a source of great pride. They view it as something incredibly special. They're building it for the nation.' Wikipedia.com

 

 

It is,it's very special.The bow is the first(and last) thing they'll see when it's comes time for them to kiss their asses goodbye :)

Posted
Propulsion:

 

Diesel Engines 4 Colt-Pielstick 2.5 STC (10,400hp each)

 

That's BEFORE Justin get's his hands on them. :lol:

 

 

does he pay you for every time you say his name or something? lol you throw his name out a lot

 

 

It was a JOKE! :P

 

 

And after Jesse gets his hand on them (ignore the hangers :) ).

 

exploded-engine-2.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,909
    Total Members
    8,960
    Most Online
    DWic
    Newest Member
    DWic
    Joined
  • Who's Online   5 Members, 0 Anonymous, 699 Guests (See full list)

  • Latest Articles

  • Posts

    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
    • I had an alternator fail that was shorted internally in such a direct fashion in addition to the larger gauge cables that it appeared like a VERY dead battery. Granted I think the car did power up, it definitely wouldn't start.   Rodent damage to wiring?
    • ... I don't think he could.
    • Using experience to justify bad advice is lazy and typical of someone incapable of articulating why their advice is prudent.    This immediately sets off the BS alert and the advice that followed certainly qualified.   Asking an idiot for help getting out of dumb situations because he is an expert... at getting himself into dumb situations.   Unless I've been living in an alternate universe - the first thing everyone does when getting into a sticky situation is shift to a higher gear 🤨.   Of course not, the torque multiplication, mechanical advantage and finer control typically afforded by the lower gear is far better suited for this scenario.   There ARE scenarios where a higher gear MIGHT be appropriate determined more by the drivers ability to control EXCESSIVE wheel spin versus applying torque to the ground.
    • I'm not sure I agree with "extreme" low speed, high torque sentiment here with regards to the prescribed use of low range. How about...whenever it's needed?   A 2.72:1 transfer case and whatever differential gears these Silverados have (3.42's, maybe?) aren't producing "extremely" low crawl speeds. Or insanely high torque multiplication. Even with the 1st gear in these newer transmissions. But it does provide mechanical advantage and potentially better control at slower speeds. And with extra weight or towing, I think it adds mechanical sympathy for the truck as well.   Plus, traction control and the other assists generally turn off when you shift into low range. Those aren't needed here, they'll work against you if you need wheel spin. In high range you'll need to figure out how to turn off the various modes those assists provide. Depending on the vehicle, those things don't all automatically turn off or turn completely off.   While I agree that a farmer might have some great practical experience, a recommendation to "always" using one gear isn't very informed advice. If the farmer had said WHY and could explain the physics behind his prescriptive "always" I'd definitely listen. The way he's described here makes it sounds like he could either be uninformed or is telling everyone what worked for him, not necessarily that there could be a more advantageous way about things.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...