Jump to content

97 Gmc 2500 Engine Will Not Disconnect From Transmission

bigj112605

Recommended Posts

bigj112605 Enthusiast

bigj112605

Posted
Posted

i have a 97 GMC 2500 4x4 with a 5.7l vortec, i am taking it out because the head gasket is blown and i got a engine at a new great price. I have tooken out all the trans bolts and flywheel bolts off. i have the engine on a hoist and when i try picking it up it trys to bring the trans with the motor.

 

So i took the motor mounts out to help, but it still doing it. Im not sure if thr engine heated up sooooo much that it achually welded its self to the transmission.

If you have any suggestions i will consider them all. I am soooo ready to crack a beer open and jut call it quits.

txab Senior Enthusiast

txab

Posted
Posted

First make sure you have ALL the bolts out. There are some alignment pins that help in mating the engine to the tranny. These maybe causing your problem. You're going to need to start working the joint between the engine and bell housing and slowly spread them apart.. Work your way around the bell housing

Draenor Senior Enthusiast

Draenor

Posted
Posted
First make sure you have ALL the bolts out. There are some alignment pins that help in mating the engine to the tranny. These maybe causing your problem. You're going to need to start working the joint between the engine and bell housing and slowly spread them apart.. Work your way around the bell housing

+1

 

Sometimes the alignment pins seize to the plate. Did you use a prybar and push the TQ back to the tranmission.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Grumpy Bears 2015 Silverado 2WD

      By Grumpy Bear · Posted

      Notes 7/18/2026   3,400 miles on this batch of Mobil 1 Euro 5W40 since the GDI pump replacement. Alcohol runs very clean when ring seal is tight and the sump isn't getting hosed with fuel. Checked oil level at fill up today as is my practice and grabbed a white Kleenex to look at the color. What color?  I was going to change it but.....  
    • Another JR
      2 speed transfer case optional now?

      By Another JR · Posted

      4 low is really nice on steep boat ramps. 
    • Chuck FB
      Gas Prices

      By Chuck FB · Posted

      Interesting, I suspect I would have fueled up in Lee Vining as the day prior I would have filled up either in Laughlin or near there and maybe again before I entered Death Valley and once out the other side late that evening as I kept on driving into the night up near Lee Vining. Next morning I most likely fueled up in LV before heading over Tioga Pass into ( as I refer to it as "Yose .... Mite" 😁 ). And again that was 19 years ago but the price then must not have jumped out at me like the 5 bill a gallon theme of nutty cult hippy country Big Sir or head so far up their rear Aspen. I'd be curious to know where the highest prices are in the lower 48, I probably would not be far off to guess somewhere in Cali forn ie. Coldfoot and Prudhoe bay may have those prices beat but that is a whole other world up there and when prices are more normal elsewhere that is about what they can be up there I believe in no mans land. Anyway interesting that the 395 corridor is hosing people and the thing is, its tourist season and its not like there are a lot of competition options when driving up that highway from what I could see. Yup, big ole Boaterhomes and various other RV's ahead and behind me at the Yosemite entrance gate and they have to get their fuel somewhere.  
    • Atlas
      Gas Prices

      By Atlas · Posted

      Those can be high, as well as the big California cities. The ones that will pop your eyes out are the 395 corridor on the Eastern side of the Sierra Nevadas. Lee Vining, $7.19 for regular and $8.89 for diesel is what the Google said right now.
    • newdude
      2020 Trailboss 6.2 replacement

      By newdude · Posted

      Correct.  2019-2021 model years are serviced by a different p/n.  19420611.  Recall 2021s use 19420611.   The recall engines 2022-2024 model years are serviced with 12740076.     The difference between 19420611 and 12740076 is GM changed injector size for 2022.  The injectors are smaller on 12740076 with smaller injector bores in the cylinder heads to match the smaller injectors.  So you can't install a 19420611 in a 2022-2024, and you can't install a 12740076 in a 2019-2021.     Both engines are the replacement engine p/ns that are in the L87 recall.  So both of these are the updated engines.     Here's a version of the L87 recall with the p/ns for all the parts needed.    RCRIT-25V274-7075.pdf   Note it shows 19420611 and 12740076 with an asterisk to a footnote "Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which part to order if two or more part numbers are listed for the same part, as it may vary by vehicle options."    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...