Snow Plow Package?

[mllc]

hey guys, i was wondering if there was a way for me to find out if my HD has the plow prep package? like is there a code somewhere on the door, or a certail letter or number in the VIN?

 

thanks guys

[Vortec-Z71]

RPO Code VYU (found on the sticker in the glove compartment)

 

Snow Plow Prep Package, includes 10-amp power for backup and roof emergency light, (KG3) 145-amp alternator, high-flow front bumper, forward lamp wiring harness, 1.65" (42 mm) access hole with grommet in front of dash panel, roof beacon lamp provisions with switch on the instrument panel, instrument panel jumper wiring harness for electric trailer brake controller, (K47) high-capacity air cleaner and (NZZ) Skid Plate Package

[sonjaab]

Fastest way is to look for the beacon light on/off switch on

the dash in the GMT-800s or the overhead console on the

GMT-900s

[mllc]

k. thanks guys. i guess i do have it, as i have the switch on my dash for beacon lights.

[Kodiak450]

Anyone have a picture of this beacon light switch? Snow plow prep is basically the same as the camper towing prep. You get a tranny cooler ect. At least it was that way with the Fords.

[Q101ATFD]

Anyone have a picture of this beacon light switch? Snow plow prep is basically the same as the camper towing prep. You get a tranny cooler ect. At least it was that way with the Fords.

[59ih340]

Anyone have a picture of this beacon light switch? Snow plow prep is basically the same as the camper towing prep. You get a tranny cooler ect. At least it was that way with the Fords.

 

EWWWW he used the "F" word

[Kodiak450]

So if I wanted to hard wire my roof strobes I would be able to use this as the on/off button? If so, where do the wire leads come out of?

 

Thanks for posting the picture.

[mllc]

So if I wanted to hard wire my roof strobes I would be able to use this as the on/off button? If so, where do the wire leads come out of?

 

Thanks for posting the picture.

 

to my knowledge they come out of the 3rd brake light, just unscrew the plastic and they should be there.

[Kodiak450]

Thats how I ran my wiring to my strobes that are magnet mounted on the roof. I also used that same area to add a switch for my 4 corner hidden strobes.

[sonjaab]

For full info on the VYU plow prep option as well as

where to find the wires, what colors they are, where

the relay is and how to power up the dash button on

the 03 and up model GMT-800s as well as upfitter info.

and pics and info on the GMT-900s check out:

http://www.letstalksnow.com/forums/showthread.php?t=9623

 

FYI: The 2 beacon wires are bundled and blunt cut and are

above the headliner on the front drivers side.

They run along the floor and up the left side rear pillar where they run to the relay (which is near the shoulder belt

anchor bolt) then continue and dead head over the driver.

[ryanmalone425]

i have the switch and i blew it up and i cant find anywhere to buy a new one. any ideas? thanksss

[sonjaab]

GM dealer.