Jump to content

silveradosid

Member
 View Profile  See their activity

  • Posts

    2,688

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by silveradosid

  1. silveradosid
    engine cold or warmed up, what was the outside temp
  2. silveradosid
    does it slip in all gear or in higher gears, no crap in the pan and burnt fluid usually is clutches slipping
  3. silveradosid
    Jason92 did you do anything to the transmission yet
  4. silveradosid
    6 or 8 speed
  5. silveradosid
    depending on the system most hydraulic brake systems work between 1200 to 1500 psi
  6. silveradosid
    has anyone compared the old with the new, could you take the inner parts from the new one and put them in an old one, this way i would not have to change my tranny lines
  7. silveradosid
    new trucks send a ground signal to the bcm for the signals
  8. silveradosid
    if you are swapping the complete axle, then yes the brakes and u-joints are the same. you cannot just switch the inside parts because they have different size bearings
  9. silveradosid
    if it is slipping it has probably put a lot of crap in the tranny oil and the tranny it self is going to fail. i would check the fluid first to see if it is contaminated.
  10. silveradosid
    it is a sensor for a tracking device. we have the same in our trucks. each driver has a sensor that you touch to that round sensor and the tracking device and our company knows which driver was driving
  11. silveradosid
    my 2014 lasted 2 years, i was already over mileage for warranty so gm wouldnt replace it. so i bought a new battery from canadian tire and it has been good ever since.
  12. silveradosid
    it is a dual filament bulb, start up does park light , remote does the brighter brake light circuit, replace the bulb
  13. silveradosid
    this maybe the answer Bulletin gm grounds.rtf
  14. silveradosid
    it depends on how many miles are on the tranny
  15. silveradosid
    try unplugging your trailer plug harness
  16. silveradosid
    check the axle vent, on my truck it was the cause of weeping seals
  17. silveradosid
    you would have to have the key on, but yes you could
  18. silveradosid
    just to confirm, tech2 will not scan the truck properly, you need to use gds2
  19. silveradosid
    usually somewhere near the bcm so they can splice into wires
  20. silveradosid
    here is the wiring for the camera and reverse lights, also if you have a trailer plug take it apart and make sure the connections are good rear camera.pdf reverse lights.pdf
  21. silveradosid
    because the problems seem to be related to the brake pedal, i am thinking some one might have put in an aftermarket security system
  22. silveradosid
    next step is to look for some type of aftermarket product that has been added to the truck
  23. silveradosid
    google g218 ground and check that first
  24. silveradosid
    this will help radio speakers.pdf
  25. silveradosid
    my truck has a ticking noise that sounds like it is coming from the transmission, but it is actually the hpfp that makes the noise
×
×
  • Create New...