Jump to content
  • Sign Up

Fs: 2" Rough Country Leveling Kit (07+)


BurroWDMS

Recommended Posts

Posted

Had this on my truck since March. Was on my 2WD Sierra. Just swapped shocks and went with the Bilstein 5100s which allow for different spring perch settings, so I have no need for this kit anymore. All the pieces are in good shape. The only thing you need to provide is new bolts.

 

You can mix and match these to get up to 2" max lift. This is not the "new style" kit they currently show on their website.

 

$50 shipped to the continental US. PM me if interested.

 

Thanks!

 

.rc1.jpg

rc2.jpg

 

rc3.jpg

 

 

rc4.jpg

Posted

Interested. What difficulty will I run into on getting the bolts? I have no idea what kind, length, type to buy. Would that end up being a headache?

 

Also with the kit installed will I be level on my stock 09 Silverado or nose high? I think I understood the older kits needing to be 1.5in and now the new kits are simply offered only in 2inch. Just makes me wonder if RC changed something on the new one and now marketing it as a 2inch to eliminate confusion..

 

THanks!

Posted
Just makes me wonder if RC changed something on the new one and now marketing it as a 2inch to eliminate confusion..

New ones are a plastic composite. The reason for the changes is probably because it is cheaper to make the plastic composite versus the different thickness pieces of steel. Plastic ones are probably just molded, which makes it way easier. I bet it is just a money thing.

Posted
Also with the kit installed will I be level on my stock 09 Silverado or nose high?

 

 

You'll actually still have about .5" rake. I have a 2.5" and it sits perfectly level. But the rough country is a great quality kit!

Posted

Currently awaiting a payment. I didn't realize I'd have so much interest :rolleyes:

 

As far as the bolts, the instructions say they are 10mm. I don't know the length. The shop that did my new shocks tossed the old bolts. I'm sure Rough Country can provide this information if you gave them a ring.

Posted
Currently awaiting a payment. I didn't realize I'd have so much interest :cheers:

 

As far as the bolts, the instructions say they are 10mm. I don't know the length. The shop that did my new shocks tossed the old bolts. I'm sure Rough Country can provide this information if you gave them a ring.

According to the installation instructions, the parts required will be:

4 -10x1.5x80mm bolts

8 -SAE Flat washers

4 -10mm nuts

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.