Jump to content

billet grilles

RapidRide2

Recommended Posts

RapidRide2 Enthusiast

RapidRide2

Posted
Posted
I have a 2003 sierra,, and am wanting to install a billet grille ,, What are some of the better quality, and looking grilles  t-rex carriage works, trenz etc??    Do the grilles that take no cutting or drilling look as good as the ones that need a little fabricating???
Roofer Senior Enthusiast

Roofer

Posted
Posted

Look at the Putco ones. I think they have some nice grilles. I just got one of the Punch Grilles on my Chevy. They are stainless and no modifications are required.

 

Heres the link

 Putco

OCFreedom Enthusiast

OCFreedom

Posted
Posted
i have the carriage works in my 01 sierra 2500HD.  I like it alot, very easy to install....With an electric dremel to burr out the grill makes life cake.  The only thing I will say is that I would rather the spacing on the bars be a little closer together....allows too much sight of the radiator support bars.  I am not certain but i think T Rex has a little closer gaps.
  • 2 weeks later...
OneFastSilverado Enthusiast

OneFastSilverado

Posted
Posted

I personally like the Trenz billet grilles. They are far exceptional to any brand. Very good quality. They even come with a lifetime warranty. If the finish dulls, send it back and they will polish it for you.

I have the flamed grille from DJ Motorsports. The installation is more difficult than average because it requires 17 rivets. But the finished product is hella cool! :cheers:  :thumb:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Acceptably cheap tires?

      By Atlas · Posted

      Which one, the AT or AS?   Starfire is made by Cooper/Goodyear but at $85/tire I'd think I'd need to level-set my expectations that they may not even be round 😉 But you're saying they're decent?   I'm already into this thing $1506 in parts, fluids, etc. Totaled all my receipts today. $250 of that was replacing an EGR and MAP sensor that were probably fine, but I'm not going to return the parts since they've been installed. I'm cheap, but not that cheap. I use it, I keep it!   I may or may not make money if I sell the truck at this point, but, that wasn't really the point. And if I billed my time, I'd be hosed for real. My thought on the tires is I "might" put 1,000 miles on before selling it. I just don't want to put absolute junk on it, that doesn't do anyone any good. If the Solus solidly isn't junk, I'll definitely consider them.        
    • rjgvt
      Is your l8t engine bay super dusty?

      By rjgvt · Posted

      I leave mine as is. I'm always a trip away from riding on unpaved roads. Dealer can clean it when they prep it after I trade it in for another new truck.
    • Grumpy Bear
      Acceptably cheap tires?

      By Grumpy Bear · Posted

      I have these on two vehicles and love them. Pepper is one of them 😉 
    • Atlas
      Acceptably cheap tires?

      By Atlas · Posted

      4WD. Far as I know it came stock with P's and not LT's. Definitely planning to put P's on it, but stock is a 109 XL load rating so I should probably stick within that guideline.   No rebates on anything I can see at the moment. Discount Tire is offering $50 off, but Pep Boys is very competitive on price, and also carries all the off-brand stuff. Les Schwab always wants an arm/leg, but they do good work.   It still has the original spare. Goodyear Wrangler RT/S, thing looks like a tractor tire LOL!! How times have changed.    
    • JohnRoy
      2020 Sierra 2500 windows rolling down

      By JohnRoy · Posted

      2020 Sierra 2500 HD (base model) gas engine 4wd.    All 4 windows roll down on their own. Happens somewhat randomly after stop and engine off - when engine turned off, when walking away from vehicle before or after locks activated. Pulled the window fuse F14 Instrument Panel Fuse Block Right; the driver's side still activates from driver's side door panel; passenger and back seat windows activate from local switches on their doors but not from driver's side group of switches. Power mirrors don't activate with fuse removed either (same fuse for both circuits). Problem not solved.    How can they even activate with fuse removed but they are all still opening and can control from each door?  When they open on their own, I can shut them from the switch in each door, but they don't stay closed.    Seems to be activated somehow with key fob; something bumping the key fob in my pocket or just handling - removed key fob and took it far enough away and now the windows stay closed. Replaced key fob batty just in case, no change.    Sounds like some kind of wiring short or maybe electronics. Dealer will first replace electronic control module without checking anything else and I anticipate problem will still exist since their troubleshooting skills are limited to "do whatever the computer says".  In any case, keyfob seems to be activating the circuitry.    Surely I'm not the only one with this issue, but I can't find anything related on the site. What do yall think?   JohnRoy  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...