Jump to content

Recommended Posts

Posted

If you know the hours, you can figure your avg speed, and gallons per hour if you have gallon counter too. Kind of fun to look at.

Posted

If you know the hours, you can figure your avg speed, and gallons per hour if you have gallon counter too. Kind of fun to look at.

yea, I did that a couple times (avg speed) but really not important to me.

Posted

yea, I did that a couple times (avg speed) but really not important to me.

whats important to me if they put somthing in a truck I want it to work and clearly its a flawed piece of crap that i paid for .

Posted

whats important to me if they put somthing in a truck I want it to work and clearly its a flawed piece of crap that i paid for .

so it is a flawed piece of crap. It dosent leave you broken down on the side of the road. what about the crappy fuel pumps, the cold start knock, cheesy interior materials, steering shafts that need to be replaced repeatedly? To me lots of things more important than the hour meter. If it wasn't there nobody would be saying "how come they didn't put an hour meter in the truck?"

Posted

Mine hasnt reset. I love the features of the trip counter (gallons used, avg speed, avg mpg) on long trips like going to Utah

  • 7 years later...
Posted
2 minutes ago, Rdsoldier22 said:

My 06 6.6 lbz just reset for the first time with 210000 miles and the hours were at around 3500. Now it reads 3.2 hours. Thats irritating to say the least. 

And for no particular reason. Weather maybe! Lol

 

After reading this i would have to say I guess I feel pretty lucky with over 200k miles and nearly 4000 hours it has only reset once "so far"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have A 2020 1500 5.3 8 speed. LTZ. Transmission problems since 60,000 miles. Started when I go to store in morning to get my morning coffee before work leave truck running get back in put it in drive/ rev no movement step on gas a little slams into gear. Put in neutral step on gas little shake then put in gear and gose.  Shut truck off start .. ok now at stop light stop truck after a few seconds feel a little kick if that doesn’t happen stuck in 3/4 gear shut truck off wait few seconds and start usually ok again. If you down shift manually ok as long as you get into 1st before stop. If not it kicks . I WANT A NEW TRANSMISSION. Now I want a new truck it just hit 80,000 IDK IF ILL BUY CHEVY CAUSE THEY STILL HAVE THE PROBLEM AND REFUSE TO RECALL . Oh I’ve changed the fluid and filter 3 times now. And yes used mobile 1 not ac/delco cause it’s not meeting the requirements that mobile is did use ac/delco filter 
    • Of course refrain from political debate but I myself have very dismal hope for what is all going on up here every where we turn so I nodded my head when I saw this joke.     
    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...