Picked Up A Electric Fan

[chas0218]

Alright so I stopped into a local pick and pull and found a taurus electric fan. It pulls 3600 cfm on high and 1800cfm on low. Now my question is I want to hook it up to the PCM and was wondering which wires I want splice into.

 

My other option was to run a seperate module. I was looking at the advance auto imperial thread in and press in probe.

 

Thanks for the help,

Chas

[nickvrebel]

to run a fan from the PCM - most people go with fans from either an LS1 or LT1 F-body (Camaro or Firebird).

then use a fan relay harness such as: http://www.pcmforless.com/index.php?option...&Itemid=286

then you need a custom tune to tell the PCM to tell the fans to turn on.

[chas0218]

Would a hand held tuner allow me to tell the PCM to turn the fans on?

 

to run a fan from the PCM - most people go with fans from either an LS1 or LT1 F-body (Camaro or Firebird).

then use a fan relay harness such as: http://www.pcmforless.com/index.php?option...&Itemid=286

then you need a custom tune to tell the PCM to tell the fans to turn on.