Jump to content

2014 - Power front seats (ventilated)?


CCTiger

Recommended Posts

Posted

I have had my truck almost 6 weeks now.

 

I notice the mechanism under the front seats seems to have more play in the pivot points than I have experienced in other vehicles.

 

Is that something seen on previous models of Chevy trucks, advice on how to fix to tighten up the seats to make them more solid?

Posted

I intend to use the warranty and take it in.

 

I was asking if this is something others experienced on GM trucks with similar seats - the pivot/hinges are not tight so the seat will move a little even when driving, and the slack (seemingly poor fit) at these points also is enough that you can hear the sound when the seat moves due to fit (an audible pop type sound from the metal). I believe, but don't know it is where the mecahnism hinges, the bolts/rivets/bushings are not well fitted.

 

I hoped it was something someone else had experienced in a previous model year.

Posted

Weird you say something about that just this week I have felt a popping and a bit of slack feeling in my seat mainly when I turn. Maybe we can get some others to chime in and see if its happening in others.

Posted

Same here. I've been trying to figure out where it is coming from. When I attempted to move the seat while standing outside of the truck, it felt solid. Do you all have the safety alert seat? I had a thought that the cushion might be sliding. Haven't spent too much time tracking down the problem, but it is getting irritating.

Posted

I was able to move mine just a little and the sound seemed consistent - mine moves if I slow down too quickly or take a harder turn - it is not much but I can feel it and I would like to see about getting that fixed.

 

I don't know what the safety alert seat is, but mine are the leather, power adjustable with ventilated/cooled seats and I can move it slightly up/down lifting on front of seat and a little from side to side, pushing on the bolster near the driver's door (I think that is what the raised pad on the edge of the seat is called, but don't know).

 

It moves very little, but enough to be disconcerting if unexpected.

Posted

I've not noticed that with my leather-appointed AT seats. Passengers have not mentioned anything to me either. Both seats are fully-powered.

Posted

I was able to move mine just a little and the sound seemed consistent - mine moves if I slow down too quickly or take a harder turn - it is not much but I can feel it and I would like to see about getting that fixed.

 

I don't know what the safety alert seat is, but mine are the leather, power adjustable with ventilated/cooled seats and I can move it slightly up/down lifting on front of seat and a little from side to side, pushing on the bolster near the driver's door (I think that is what the raised pad on the edge of the seat is called, but don't know).

 

It moves very little, but enough to be disconcerting if unexpected.

Hello,

 

I see that you have some concerns about your new 2014 Silverado. Can I assist you with anything?

 

Safe travels,

 

Jennifer T.

GM Customer Care

Posted

Thank you for asking. I am going in for my 1000 mile courtesy check tomorrow and they said they would check it. I know it can't be overly tight, but I think it moves a little too much and makes a noise sometimes when it does - my thought is at least the side to side and (what I interpret as) popping can be fixed I hope but I have never see the underside of the seat in detail, hard to see under there.

 

But, I am certainly appreciative of any insight or input you might have on this.

Posted

Sounds like its with the lane departure seats. Guess ill take mind in one day to figure it out.

Posted

If mine has lane departure, I am unaware of it and don't see any evidence I have that.

Posted

If mine has lane departure, I am unaware of it and don't see any evidence I have that.

 

The evidence would be a hole in your pocket book. Would show as an option of about $845 plus requires heated and cooled seats option.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,804
    Total Members
    8,960
    Most Online
    LCH14
    Newest Member
    LCH14
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,647 Guests (See full list)

  • Latest Articles

  • Posts

    • I'd change the fluid and start there.   198F is nothing for the 8L90.  They typically operate 180-200F stock.  
    • Looking for help!   2019 GMC Sierra 1500 - 5.3l 4x4 8l90 61k miles - truck is in Arizona, was over 110 outside on Monday when this whole situation transpired. Never had any major issues with transmission until this point:   Truck sat outside my construction office for approx 1 hour idling before I realized, ran around the job site wrapping some things up for the day and then left. Went to get food and sat in the drive through for approx 30 minutes idling. As soon as I pull out of the drive through and onto the main road, rear tires lock up and feels like transmission fell out of the truck. Shifted to park, shut the truck off and tried again, same thing happened. Was able to reverse into parking lot (truck slammed into reverse). Let the truck sit turned off for 10 minutes before trying again, but it continued to happen. Towed truck back to my house. Highest the trans temps reached was 198.   Friday, after work I start looking into the situation. Truck sat in my driveway untouched all week. Truck is now driving like normal, transmission doesn’t get over 185 degrees when trying to heat it up. Got up to 60 multiples times with no issues, no issues accelerating, only down shifted hard into first one time at 185 degrees. Does anyone have any insight? Never through a code or a check engine light. Truck has never been used to tow either. No transmission services at this point.
    • Atlas won.   I know better, but I did it anyway. I took a compressed air line with a chuck and rubber tip and jammed it in the open EGR port. The port was clear as far as I could see, and as far as I could poke with a flexible wire, but that doesn't mean it's not clogged.   Compressed air blew back at me along with a cloud of black. Oops. I didn't have the rubber tip seated in there all the way. Jammed it up in there some more and squeezed the chuck. PSI was set to 120. Poof! It blew back at me again. Third time...pfffffttssssssspffffffsssfffffff, face full of carbon, and then, kind of a thud..and the air stopped spraying back at me. It was now exiting the exhaust with a low shhhhhh sound as it flowed through the pipe. Something broke free. I pressurized the port again, and air flowed.   Made my day.   Long story short on this problem, it's fixed. Something was really blocking the EGR passages down low, and compressed air blew it apart. I don't recommend this as who knows what debris was sent where. But it's allowed me to move forward, mentally, and onto the next problems I need to get this little S-Blazer going down the road properly again.  
    • Your truck lowered, looks good. I'm happy with the stance on this. I may need the extra ground clearance given my location/situation.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...