Jump to content

rdnckhntr94's 2014 Silverado High Country Build

LongrangeLauber

By LongrangeLauber
in Member Build Threads

 Share

Recommended Posts

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

Installed some Kryptonite UCA's and Kryptonite lower balls joints the other weekend. Also replaced the inner and outer tie rod ends. Truck definitely seems to handle and ride a lot better now. I'll post up some pics soon of these since I haven't posted pics of the truck in general in a while.

 

Also put on some new tires back in October. General ATx 35x12.50R20. Have fewer plys than the Ridge Grapps I was running and ride so much smoother. Hopefully they hold up as well as the Ridge Grapps, because I got about 60k miles out of those.

 

Currently dealing with emissions issues (P0420 & P0430) codes and have had it in the shop now three times for this issue. Truck definitely drives differently (less giddy up) with these codes present. At first they replaced the cats. Then they tried O2 sensors. Let's see what they come up next. 

 

For more info on this issue, checkout the thread I've had going for a while now and been keeping somewhat updated as things progress:  https://www.gm-trucks.com/forums/topic/250763-random-misfire-p0300-and-o2-sensor-codes/page/2/#comment-2566115

 

  • 2 months later...
  • Replies 361
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

LongrangeLauber
LongrangeLauber

Removed the air dam just now. Makes a world of difference. Sorry forgot to take a before pic     Still want to lift the nose up so looking into level kits as we speak. Measurements that I took ye

LongrangeLauber
LongrangeLauber

Just ended my 800 mile round trip towing about a 3600 pound trailer, 400 pounds of gear in the bed, plus the truck had 4 full sized adults in it. Worked it up and down the appalachian mountains. She w

LongrangeLauber
LongrangeLauber

Well, figured what better time to start a build thread than on a new truck since I never did do one on my 02. Anyways, bought the truck November 29, 2014 and as of right now, a few days later, its sti

Posted Images

LongrangeLauber Senior Enthusiast

LongrangeLauber

Posted
  • Author
Posted

Fixed the emissions issue with a new OEM GM catalytic converter y- pipe assembly (part #: 19420276). I can finally go get my emissions test done and quit riding around on 5 month old dead tags! 😅

 

Next mod I think I have in mind are some coilovers for the front. Looked at the Rough Country Vertex coilovers and the price was appeasing, but I've read that they are not rebuildable. So I think I'm locked into the Fox coilovers that BDS offers as an upgrade option when you purchase the lift. This will probably be down the road a little ways, but maybe I'll do a few small things here and there because I can't ever leave anything alone for long lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,782
    Total Members
    8,960
    Most Online
    ShowMeShooter1332
    Newest Member
    ShowMeShooter1332
    Joined

  • Who's Online   1 Member, 0 Anonymous, 5,964 Guests (See full list)

  • Latest Articles

  • Posts

    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • davester
      Disconnecting Battery

      By davester · Posted

      If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • davester
      Disconnecting Battery

      By davester · Posted

      It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
    • BCGM
      Remote Start Noise 2024 2500 HD Gas

      By BCGM · Posted

      JR ! I just got the truck back from the Dealership today . The technician did a cold remote start on the truck this morning and it made the noise . It was determined that it was a starter issue and replaced it under warranty . Of course   it did not make the sound after a new starter was put in because the truck was not cold . We will we see what happens tomorrow morning when I start the truck cold  . Keep tuned !   Oh I found a video on YouTube of a cold start and it did the same thing your truck and mine do , I will see if I can find it and post it up

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...