Jump to content

WAY SERIOUS- from Fox News

MarkD

By MarkD
in The Off-Topic Bar

Recommended Posts

MarkD Senior Enthusiast

MarkD

Posted
Posted

The last letter written by Army Pfc. Diego Fernando Rincon, 19, of Conyers, Ga., to his mother. It is dated Feb. 22 and received March 22. Rincon was killed in Iraq in a suicide bombing attack Saturday:

 

Hola Mother,

 

How are you doing? Good I hope. I'm doing OK I guess. I won't be able to write anymore starting the 28th of this month. We are moving out. We are already packed and ready to move to a tactical Alpha-Alpha (in Iraq). Once that happens, there will not be any mail sent out. We will only receive mail that is less than 12 ounces. At least that's what they said. I'm not sure where exactly we're going be at yet, but it is said to be a 20-hour drive in the Bradleys.

 

So I guess the time has finally come for us to see what we are made of, who will crack when the stress level rises and who will be calm all the way through it. Only time will tell. We are at the peak of our training and it's time to put it to the test.

 

I just want to tell everybody how much you all mean to me and how much I love you all. Mother, I love you so much! I'm not going to give up! I'm living my life one day at a time, sitting here picturing home with a small tear in my eyes, spending time with my brothers who will hold my life in their hands.

 

I try not to think of what may happen in the future, but I can't stand seeing it in my eyes. There's going to be murders, funerals and tears rolling down everybody's eyes. But the only thing I can say is, keep my head up and try to keep the faith and pray for better days. All this will pass. I believe God has a path for me. Whether I make it or not, it's all part of the plan. It can't be changed, only completed.

 

Mother will be the last word I'll say. Your face will be the last picture that goes through my eyes. I'm not trying to scare you, but it's reality. The time is here to see the plan laid out. And hopefully, I'll be at home in it. I don't know what I'm talking about or why I'm writing it down. Maybe I just want someone to know what goes through my head. It's probably good not keeping it all inside.

 

I just hope that you're proud of what I'm doing and have faith in my decisions. I will try hard and not give up. I just want to say sorry for anything I have ever done wrong. And I'm doing it all for you mom. I love you.

 

P.S. Very Important Document.

 

Your son,

 

Diego Rincon

MarkD Senior Enthusiast

MarkD

Posted
  • Author
Posted
BTW, he was one of the Servicement killed by the car bomb at the check point Saturday March 29, 2003 :jester:Angel_anim.gif
maggot Enthusiast

maggot

Posted
Posted
Your last letter home is the hardest letter to put on paper. You are writing it as you last letter with all types of  motions running through your mind. It is tough thing to do, he sounded like a great person and he gave his all. Just  Americas have and will do. I wish his family and him the best thoughts I can give.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,949
    Total Members
    8,960
    Most Online
    Gkistler
    Newest Member
    Gkistler
    Joined

  • Who's Online   4 Members, 0 Anonymous, 877 Guests (See full list)

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...