Jump to content

Polarized Coating on In Dash Screen Terrible


Dirtybird31

Recommended Posts

Posted

I tried a little to hard to keep the fingerprints from collecting on the touchscreen. Sprayed some lcd cleaner on the blue cloth that came with the truck to clean to screen noticed the polarized coating was coming off. Was unaware i needed to purchase a screen protector. Going to the dealer on Thursday.

Posted

That cloth is to wipe the prints off. No chemicals.

 

Right from the MyLink owners manual:

 

 

Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays

For vehicles with high gloss surfaces or vehicle displays, use a microfiber cloth to wipe surfaces. Before wiping the surface with the microfiber cloth, use a soft bristle brush to remove dirt that could scratch the surface. Then use the microfiber cloth by gently rubbing to clean. Never use window cleaners or solvents. Periodically hand wash the microfiber cloth separately, using mild soap. Do not use bleach or fabric softener. Rinse thoroughly and air dry before next use.

 

Posted

I use Chemical Guys - Nonsense to clean pretty much every interior surface. I've used it on the screen before too and it does not effect it. Nonsense is a pretty gentle all-purpose cleaner.

 

But anything like glass cleaner or the like with heavy chemicals will not play nice with that screen.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...