Jump to content

Ventilated Seat Question


srbbell

Recommended Posts

Posted

Hello all,

 

Just recently bought my truck and have been browsing these forums for a while garnering useful information so I decided I'd finally go ahead and join.

 

My question is in regard to the ventilated seats on my truck concerning normal operation. When I turn them on, within a very short period, the seat cushion, and consequently my butt, gets quite cold. However, the back of the seat seems to have a much more subtle effect. Are my seats functioning normally? The seat cushion has a much more pronounced cooling effect than the seat back.

 

Just want to make sure this is to be expected before I make a potentially unnecessary trip to the dealer.

 

Thanks!

Posted

Mine operates in a similar fashion. In my opinion, this is one of the most worthless additions to the truck especially if you carry rear passengers. A fan in the back of the seat pulls air through the seat cushions and blows it out the back. The heat removed from the seating area in addition to the heat generated from the fan makes the back seat rather hot (both to the touch and ambient temperature).

Posted

Mine operates in a similar fashion. In my opinion, this is one of the most worthless additions to the truck especially if you carry rear passengers. A fan in the back of the seat pulls air through the seat cushions and blows it out the back. The heat removed from the seating area in addition to the heat generated from the fan makes the back seat rather hot (both to the touch and ambient temperature).

2016's are vented, not cooled, and don't have the vents in the seatbacks.

Posted

2016's are vented, not cooled, and don't have the vents in the seatbacks.

With that being said, can we put 16 seats on 14-15?! Id do it in a heartbeat, i hate not being able to cool my rear without blowing hot air to anyone in the back
Posted

With that being said, can we put 16 seats on 14-15?! Id do it in a heartbeat, i hate not being able to cool my rear without blowing hot air to anyone in the back

 

There was a TSB out where the dealer could install some sort of baffle to redirect the air to the floor instead of out the back. I'd first complain to the dealer and see if they can find the TSB. I saw it somewhere in here... http://sandyblogs.com/techlink/

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined
  • Who's Online   1 Member, 0 Anonymous, 358 Guests (See full list)

  • Latest Articles

  • Posts

    • Even tougher is the 5.0 / 302. That's what this one has.    https://postimg.cc/Z9XRrCSg   https://postimg.cc/4n3F3yzY   Just realized I had the airbox removed in the engine pic, lol.
    • Yep! This should be a pin somewhere as @pgamboa really dives into all of this. Thanks for reposting the link!
    • I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...