-
Recently Browsing 0 members
- No registered users viewing this page.
-
Forum Statistics
250.3k
Total Topics2.7m
Total Posts -
Member Statistics
342,682
Total Members8,960
Most Online
-
Who's Online 10 Members, 1 Anonymous, 528 Guests (See full list)
-
Latest Articles
-
Posts
-
bead is for what please explain? -
Here's an example of how a do it yourselfer or even a shop could end up over filling the crank case during an oil change. Drop the oil on ether an almost cold engine or they did warm it up as it was a vehicle that sat in a lineup of vehicles that require repairs, they drop the oil and let that drip out as they then proceed onto do other repairs and finally lowered down off the lift and fill the now cold engine with oil, run it the half minute or less, turn off and are in a rush and check the oil level and its low ( cold engine and cold oil haven't had a chance to all drain back to the pan ) so they add oil until its at the full mark on the dipstick and then close the hood and send it out the door. The owner of the vehicle if they don't check it or seldom check it would not have a clue that the oil started out being above full. Same scenario with the do it yourselfer that is too quick to check the oil after running the engine and tops it off and never checks it again for some thousands of miles and finds the oil at or near the full mark and is impressed his vehicle uses no oil when in fact it does use some but the technique of the oil change allowed for an over fill and was not rechecked hours later to confirm the level with a cold engine and oil that had all drained back to the pan. And the thing is, its easily done if not realizing or just in a hurry and in shops time is money so there is no waiting around hours for the oil to finally drain down on a cold engine. -
-
Probably should check it while running. Like an auto transmission. Record it and check it from there.
-
By Black02Silverado · Posted
For a limited time, Preferred Customers and online/catalog customers get a free 10-mm emergency socket set with their order of $100 or more when they use code SOCKET626 at checkout. The promotion runs through June 16, 2026. Set includes two BOXO-brand 10-mm sockets: 1/4″ and 3/8″ drive 6-point sockets made with chrome vanadium alloy steel. Save up to 25% as a Preferred Customer, sign up here or contact me for GM-Trucks special. https://www.amsoil.com/p/preferred-customer-registration-preg/?zo=521390
-
-
GM-Trucks.com Clubs
-
Black Truck Club
Open Club · 612 members
-
White Truck Club
Open Club · 380 members
-
Canadian Owners Club
Open Club · 282 members
-
Red Truck Club
Open Club · 156 members
-
diesel 3.0
Open Club · 279 members
-
Texas Owner's Group
Open Club · 371 members
-
NorthSky Blue Club
Open Club · 118 members
-
Midwest Owner's Group
Open Club · 212 members
-
2015 Custom Sport Club
Open Club · 5 members
-
GM Snow Plowing Club HD
Closed Club · 14 members
-
-
Popular Contributors
-
.thumb.JPG.2c573de60d3a3a4407c7d92298db46dd.JPG)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.