Need help with wheels, tires, leveling kit

[mhodar94]

So first of all I'm not sure if this should be posted here or suspension but I'll put it here for now and apologize in advance if I'm mistaken. Anyhow, I drive a 2016 Silverado 1500 double cab all stock. I'm going to install a 3" front and 2" rear leveling kit. The wheels I want to install are 20"X10", with 4.75" backspacing and a -18mm offset. The tires I want to install on said wheels are 33X12.50R20. Does anyone have any insight on whether or not this will rub? I figured with the 3" front lift I should be ok but I'm just too paranoid to not check in first. Thanks!

[Lgetz]

With that wheel and tire combo you may rub fender liner when turning and reversing at full lock. Folks use zip ties to tie back the liners and gain clearance. Have stock OE 20's with 33x12.5's Toyo RT and have slight rub on sway bar and fender liner at full lock. Don't frequent off road too much so I haven't bothered with doing anything to the liners.