Jump to content

Upper Bellhousing Fuel Line Stud/Nut Removal Question

Quadrasteer
 Share

Recommended Posts

Supreme Pizza Senior Enthusiast

Supreme Pizza

Posted
Posted

 

    Its very easy to pull the intake, and the gaskets are reusable. 10 bolts, a few wires, and the fuel line. 

 

    You can get it off in 20 minutes. 

 

    At that point, the fuel line bracket is extremely easy to remove. 

 

 

 

   

20180710_101643.jpg

20180711_094943.jpg

20180711_095022.jpg

  • 3 years later...
  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Supreme Pizza
Supreme Pizza

I just removed that same bracket today. Not easy to get to, but it can be done in about 10 minutes with lots of extensions. No need to pull the drive-line.         

Posted Images

TeamT New Member

TeamT

Posted
Posted

This is an old post, but for anyone still dealing with this… 

 

Use a very long flat head screwdriver and just pry the bracket open.  Just enough to create room to slide out the lines from above.  Remove the front driveshaft from the front differential but leave it in the yoke.  Cut off the lines as close to the bell housing bracket and you can.  Then just slide them out from the top.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • iso221
      Injector update

      By iso221 · Posted

      Because single shot injectors are ancient and multi hole injectors provide smoother running engines and sharper throttle response due to the fuel being atomized better..the best lead I have is a 24lb blue top injector almost everything matches up but the injector will put out about 26lb/hr which is just outside the gm threshold.figured id ask here to see if there was an absolute answer
    • CamGTP
      Injector update

      By CamGTP · Posted

      Why is my question?   Any change in injectors requires a tune. Unless you are going back with the OEM part number or a newer part number of that same injector.   Any size difference or type difference like the EV6 style injectors all have different injector data for them. And there is no EV6 injector that matches the factory 25 lb/hr size that your truck comes with. I've been messing with these trucks and tuning them for a long time and what you trying to do doesn't exactly make sense to me.
    • James McArthur
      2023 2500hd 6.6 l8t gas lifter ticking with misfire

      By James McArthur · Posted

      My 6.6 gas lt8 had lifter noise with 28000 miles bought new 2026 and while driven to dealer it threw #1 rod bearing “HD my ass” good luck with yours i hope it don’t turn a rod bearing!
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      When a condition becomes a business model.    https://www.gm-trucks.com/gm-truck-suv-incentives-pricing-2026/   Zane posted this in "Latest Articles".    The honest bottom line   Truck buyers have spent three years assuming this is a temporary condition that will break once inventories normalize. GM just presented it to investors as a durable strategy, on a chart, as evidence of good management.   Inventory did normalize. GM is at 511,000 units and squarely inside its own 50 to 60 day target. The discounts still did not come back, because the low incentive number is the goal rather than a symptom of shortage.   Plan your purchase around that reality instead of waiting for it to change. Follow our ongoing GM News coverage for pricing and incentive changes as the next-generation trucks land.
    • Grumpy Bear
      Winter Returned

      By Grumpy Bear · Posted

      Thought it was raining this morning when we woke. Nope. Dew point was over 80 F and humidity 98%. Zero visibility distance. Everything was 'sweating'. I've seen rain come out of clouds but never out of Pepper or the tree trunks.    Wicked storms just missed us sliding off to the east but by blocks. Heat index about 110 F with air temp in the 90's.    This is  our third wave this month of multiple days of this type of weather. And yet the grass is going dormant and the ground is cracking this side of the street and water up the the hood opposite. Just weird stuff going on. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...