Jump to content

Recommended Posts

Posted

Got a baffling issue going on.   Couple of days ago the check engine light came on with a 2017 1/2 ton Gas Silverado.    Had a dealer trouble shoot it to run the codes.   It is a communications fault and comes up U1510.    They want the truck for a couple of weeks so they can trial and error a connection or wire issue.   I am reading on-line a LIN communications break down is somewhat common,  maybe with the ECM,  the BCM or other module such as the HVAC.   Anyone seen a common issue with these newer 1/2 tons that can prevent a trial and error approach by the dealership.   I don't really want the truck dismantled while they trial and error the connections.

 

Thanks!

 

Posted

Disconnecting the battery negative cable for 30 seconds would be my first step to see if it comes back.

 

My truck set a code twice that was a lost communication with the transmission. Don't remember the number.

The first time it went away the next day.

The second time, about a year later I cleared the code with a cheap program I run on a lap top.

Then I disconnected wiring harness connectors and reconnected them for the transmission. The truck was not running and the key was off.

It hasn't returned in 2 years.

 

I wouldn't panic unless it's having problems.

Easy to re-connect the harness connectors like I did to help with a quirky connection.

IMO with the computers today a slight voltage drop can cause a code. 

 

:)

  • Like 1
Posted

"U" codes are usually a bitch.

One or more of these systems or any wire/terminal

 

K9 Body Control Module Lost Communication with B67 Ultrasonic Intrusion Sensor / B165 Content Theft Deterrent Sensor Module on LIN Bus

K20 Engine Control Module Lost Communication with M96 Active Grille Air Shutter Actuator / M60A Active Grille Air Shutter 1 Motor Module on LIN Bus

K33 HVAC Control Module Lost Communication with A26 HVAC Controls / A20 Radio/HVAC Controls / P17 Info Display Module on LIN Bus

K33 HVAC Control Module Lost Communication with A34 HVAC Controls – Auxiliary on LIN Bus

K39 Liftgate Control Module Lost Communication with K171 Hands-Free Liftgate Sensor Control Module / S45A Liftgate Control Switch – Exterior on LIN Bus

K160 Brake System Control Module Lost Communication with B80 Park Brake Switch on LIN Bus

P16 Instrument Cluster Lost Communication with S70D Steering Wheel Controls Switch - Right Upper / S70R Steering Wheel Controls Switch - Right on LIN Bus

 

 

Posted

Thanks.   Yes I did the battery disconnect and after a couple of restarts it comes back.   Same thing with disconnecting the Engine Control unit,  the dealer suggested that was where they thought the issue may be.   But it comes right back as well.   I was in the high water late last week and the transmission connection may be an opportunity the check out.   This truck is a 2017 MY.     Thanks for the response.

Posted

U1510 by it's self doesn't tell a tech much. Without additional codes and or symptoms it be almost impossible to diagnose.

Posted
On 10/24/2018 at 1:14 PM, Joel Kingston said:

Called the dealership back and they seem to recall it was a U1510 K20

 

Hi, Joel. I hope your Silverado is running smoothly. Otherwise, feel free to send me a private message, if you’re considering visiting your servicing GM dealership in the near future. Thanks!

 

 

Anthony J.

  • 2 weeks later...
Posted

All corrected now.   As tbarn mentioned it turned out to be this as the issue.   Not covered under drive train warranty, but after the replacement of the air shutter actuator and a re-flash (due to a steering disabling fault) all good now !  Thanks

U 1510

K20 Engine Control Module Lost Communication with M96 Active Grille Air Shutter Actuator / M60A Active Grille Air Shutter 1 Motor Module on LIN Bus

  • 10 months later...
  • 8 months later...
  • 1 month later...
Posted

I have a 2018 sierra 1500. Its putting up codes U1510 lost communication with device on LIN Bus, B1065 04 audio output 5 circuit. I have cleared the codes and they keep coming back. Any advice on where to start. Any help is greatly appreciated. 

  • 1 month later...
Posted

Mine is a 2017 GMC Sierra and it is giving codes U1510 AND U1501 and when it first popped up the engine was limited to power and rpms, what could it be? Only options I've seen is to clean the throttle body.

  • 4 months later...
Posted
On 7/6/2020 at 5:20 PM, Stephen1991 said:

I have a 2018 sierra 1500. Its putting up codes U1510 lost communication with device on LIN Bus, B1065 04 audio output 5 circuit. I have cleared the codes and they keep coming back. Any advice on where to start. Any help is greatly appreciated. 

I have the Exact same issue with mine. Some of the guys that posted previously seem to have a solution for a 2017 Gmc half ton that may work. He mentioned the K20. check it out above.

  • 1 month later...
Posted

Hey there, I have a 2017 GMC sierra 1500 with the 5.3L. Im also getting the U1510 code and want to fix it myself but I dont know where to start. When I unplug the battery it goes away but after one start it comes back. The truck functions fine so its not an issue with anything vital to the trucks operation clearly but i want to get to the bottom of this. 

  • 2 months later...
Posted

I got the same U1510 code on my 2018 Silverado 1500 and dealership says it’s the same as stated above, the active grill air shutter actuator.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined
  • Who's Online   0 Members, 0 Anonymous, 298 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...