Jump to content

TPMS 2019 vs 2014 compatibility

Kleeve

By Kleeve
in Troubleshooting & Recalls

 Share

Recommended Posts

Kleeve Enthusiast

Kleeve

Posted
Posted

 

Just purchased a set of 2019 Silverado take off wheels and tires for my 2014 truck   - Thought I could simply take off the old wheels & tires and bolt on the new ones.  Somewhere deep in the fine print of my purchase it says that the frequency for the tpms was changed in 2019.  Anybody know if that is true?  I don't want to take off the old wheels and tires, only to find out I'll have to un-mount both sets to put in my 2014 tpms on the 2019 wheels

 

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
Posted

From what I've seen and heard, the 19 sensors will not work on 18 and prior and the other way around. That goes for the 2500's also.

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

Thanks - looks like I'm going to the tire shop for some work 

SS502 Senior Enthusiast

SS502

Posted
Posted
31 minutes ago, Kleeve said:

Thanks - looks like I'm going to the tire shop for some work 

Yeah according to that thread his local Discount Tires couldn’t do it for him...might have to do the dealership thing or at least call whoever before a visit.

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

Local shop had me in and out in about an hour - added my existing sensors to the new wheels/tires - working great 

They knew about the frequency issue & had no problems getting things working

Anybody need some 433MHZ  sensors for a 2019 truck - no stems - Like new - less than 100 miles 

Tire rack is selling them for $50.00 each - make me an offer - Free shipping 

  • 9 months later...
Libtech29 Enthusiast

Libtech29

Posted
Posted
On 12/19/2018 at 11:02 AM, Kleeve said:

Local shop had me in and out in about an hour - added my existing sensors to the new wheels/tires - working great 

They knew about the frequency issue & had no problems getting things working

Anybody need some 433MHZ  sensors for a 2019 truck - no stems - Like new - less than 100 miles 

Tire rack is selling them for $50.00 each - make me an offer - Free shipping 

Digging up this old thread cuz I'm dealing with a similar issue. I'm trying to put some 2018 wheels on my 2019 and I was quoted 400 bucks in labor to complete the sensor swap. Seemed a little high to me. Was yours in that same range?

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

You need to find another shop - My bill was $85.00  - This was at a regional tire shop  in Michigan called Mr Tire - I would try to find a shop that only deals with tires & related labor. 

 

  • 4 years later...
Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted

CPR Time, bringing this to life again.

 

Put some 2022 AT4 takeoffs on my 2015.  My DIC shows the pressure for each tire, I figured it would not.  Only problem is the numbers are all off.  Using a pressure gauge they all show 35-36, but the DIC shows 30-31 for them all.  I tried a hand gauge and also went to a gas station and used theirs off the air pump, both were reading 35-36 psi.  

 

What do I need to do? I will also add I swapped these in my garage and only have driven maybe 5 miles on them.  

ksiesel Enthusiast

ksiesel

Posted
Posted
1 hour ago, Skeeter McSkeet said:

CPR Time, bringing this to life again.

 

Put some 2022 AT4 takeoffs on my 2015.  My DIC shows the pressure for each tire, I figured it would not.  Only problem is the numbers are all off.  Using a pressure gauge they all show 35-36, but the DIC shows 30-31 for them all.  I tried a hand gauge and also went to a gas station and used theirs off the air pump, both were reading 35-36 psi.  

 

What do I need to do? I will also add I swapped these in my garage and only have driven maybe 5 miles on them.  

Just a guess, but are you old tires still nearby your truck when you are at home?  I suspect your truck may still be learned to the old sensors in the wheels no longer on the truck.  Add to that you haven’t driven far enough yet for the TPMS faults to set for not being able to read the sensor (because it’s still at home and no longer in range).

 

I’ve never heard of a 433 MHz sensor pairing and sending ANY data to a 315 MHz system like your K2xx truck is.

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted (edited)
29 minutes ago, ksiesel said:

Just a guess, but are you old tires still nearby your truck when you are at home?  I suspect your truck may still be learned to the old sensors in the wheels no longer on the truck.  Add to that you haven’t driven far enough yet for the TPMS faults to set for not being able to read the sensor (because it’s still at home and no longer in range).

 

I’ve never heard of a 433 MHz sensor pairing and sending ANY data to a 315 MHz system like your K2xx truck is.

Yea my old tires are in my garage that my truck is in! I figured it wasn’t them as their pressure was around 34-35 when I pulled them off. You think that number would change once the weight of the truck was no longer on them unmourned? Seems kinda to make sense.  
 

I’m still guessing I’ll need new sensors put in them if that’s the case since the frequencies should be different in the 2022s.

Edited by Skeeter McSkeet
ksiesel Enthusiast

ksiesel

Posted
Posted
12 hours ago, Skeeter McSkeet said:

Yea my old tires are in my garage that my truck is in! I figured it wasn’t them as their pressure was around 34-35 when I pulled them off. You think that number would change once the weight of the truck was no longer on them unmourned? Seems kinda to make sense.  
 

I’m still guessing I’ll need new sensors put in them if that’s the case since the frequencies should be different in the 2022s.

 

The pressure will not change with or without the weight of the vehicle on the tire.  It will change pretty significantly with temperature though.

 

If you never did a sensor relearn procedure on the truck after replacing tires, you can be sure it is still looking for the sensors in the old wheels.  Each sensor has a unique transmitter number and this is what the TPMS module in the truck is looking for.  The relearn simply changes this association.  You can think of it just like a paired Bluetooth connection.

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted
8 hours ago, ksiesel said:

 

The pressure will not change with or without the weight of the vehicle on the tire.  It will change pretty significantly with temperature though.

 

If you never did a sensor relearn procedure on the truck after replacing tires, you can be sure it is still looking for the sensors in the old wheels.  Each sensor has a unique transmitter number and this is what the TPMS module in the truck is looking for.  The relearn simply changes this association.  You can think of it just like a paired Bluetooth connection.

Ok took a 100 mile trip today and they weren’t recognized after about 25 miles. Will our trucks relearn the new version sensors in them? Saw some replacements you can screw in from the outside it looked like, made to swap winter/summer wheels. No idea on them. 

newdude Senior Enthusiast

newdude

Posted
Posted
3 hours ago, Skeeter McSkeet said:

Ok took a 100 mile trip today and they weren’t recognized after about 25 miles. Will our trucks relearn the new version sensors in them? Saw some replacements you can screw in from the outside it looked like, made to swap winter/summer wheels. No idea on them. 

 

 

You need 315mHz sensors.  New wheels so 2019 T1 and up are 433mHz and won't talk to a 14-19 old truck.  

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined

  • Who's Online   1 Member, 0 Anonymous, 1,222 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      TCM Tuning 6L80E

      By Grumpy Bear · Posted

      I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Grumpy Bear
      Food & Drink

      By Grumpy Bear · Posted

      Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • Grumpy Bear
      Bridgestone vs Goodyear tires?

      By Grumpy Bear · Posted

      I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
    • Grumpy Bear
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Grumpy Bear · Posted

      Atlas, you kill me As aggravating as a project like this can be you have been unable to hide your fascination with learning and using that angst against this beast like a Ninjitsu Master. It amuses you, admit it now.      BTW, love your writing style. 😉       
    • TrueBlue
      Wow I'm in a pickle. (Broke down truck) and a story.

      By TrueBlue · Posted

      I gotta say, I'm enjoying your narration. The troubles you've been having are amusing as you describe them. It's good to see that you're finally getting some satisfaction out the old beast though.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...