BDS 4" Lift?

[CHP]

Do you have any tire rub on the 2019 Trail Boss with the 35s? What offset are you running?

[anferknee]

On 7/16/2019 at 2:26 PM, DenverRob26 said:

sweet looking truck! I just got a 2019 High Country Silverado and I am between the 2" factory and the 4" BDS. Wondering what the total heigh with your setup is since I need to fit mine into a 7 foot parking garage. Thanks!

It just barely clears a 7 foot garage. The back of the cab is slightly higher than the Mx antenna when level, (I have coilovers, not the regular spacer lift). 

[tdd3748]

Any one know if the 4"  BDS Coilover kit will fit 2020 Silverado with 3.0 Duramax?

No seeing anything to indicate it does or does not but i guess I was expecting there to be a selection on the BDS website.

There is a note that 6" kit will not fit Diesel.

 

Thanks Tom

[Oscar Rodriguez]

Hey boss, So I have a 2020 trail boss LT bought in January and in March I installed A Ready lift 2 inch SST lift kit with came with the front spacers and upper control arms and 3 inch blocks and at the same time I had installed 20s inch fuel blits with 20x12.5x35 Nitto Ridge grapplers ran that for 3 months the ride the ride was really rough with the 2 inch kit and the extra tire plies. So 2 weeks ago I went with the 4 inch BDS lift with BDS upper control arms, Fox DSC Remote Reservoir Coilovers in the front, Fox DSC remote reservoirs in the rear. So a total of a 6 inch lift all around. The truck rides like a dream on and off road. 

[Supercup]

On 7/14/2020 at 3:06 PM, Oscar Rodriguez said:

Hey boss, So I have a 2020 trail boss LT bought in January and in March I installed A Ready lift 2 inch SST lift kit with came with the front spacers and upper control arms and 3 inch blocks and at the same time I had installed 20s inch fuel blits with 20x12.5x35 Nitto Ridge grapplers ran that for 3 months the ride the ride was really rough with the 2 inch kit and the extra tire plies. So 2 weeks ago I went with the 4 inch BDS lift with BDS upper control arms, Fox DSC Remote Reservoir Coilovers in the front, Fox DSC remote reservoirs in the rear. So a total of a 6 inch lift all around. The truck rides like a dream on and off road. 

 

I have 2019 AT4 Carbon Pro - with same RL SST kit - stayed with stock 275/65/18's - have been looking to swap out for BDS - been going back and forth 2.5" or 4" (so 4.5" or 6" overall) - shop tells me to get 4", set springs at 0 pre-load, will be great and not get full 4" lift (so 6" overall).  Feel better overall ride and more travel - I don't really want to go over 4.5" for towing.

 

I had inquired about remote res or piggy back 2.5" for rear - they did not have 6 weeks ago - what did you do for rear shock? 

 

Can you post photo of your truck now complete - so we can see the look.

 

Thanks 

[BetaX]

On 7/1/2019 at 4:29 PM, CBRAGA said:

wondering if 37s and oem 20's would fit with little trim...……………………..on the 19+ hmmm

It's been done.

37's on a AT4 with a BDS 4". (Picture Stolen from Facebook, not my truck)

 

The 37's look like 1 single bump your ripping off the front of your bumper. 

Like the look, but looks like very little up travel for your tire before it would have clearance issues. 

 

 

Facebook post link:

https://www.facebook.com/photo.php?fbid=3626869547339752&set=gm.572106996781326&type=3&eid=ARBgIuQcioAah_m4bhHYZ-5C7mVY80lN4AyLmluJNWLp6F8GIW7XzC5OnyVOjksYHMYavGepRZ1xE1pI&ifg=1