Jump to content

New toys...


Wingnut

Recommended Posts

Posted

Nice machines!!! :lol:

 

I'm borrowing my buddies Polaris 500 (Scrambler?) 4x4 and going to ride in a Poker run this weekend... I love riding 4-wheelers, but I just don't have enough time to ride that I could justify the expense of a bike and trailer... :lol:

Posted
Polaris 500 (Scrambler?) 4x4

Sportsman :lol: My cousins have 3 of them. 2 are Sportsman HOs

Posted

Nice! :lol:

 

Is the Honda a 300 or 400? I can't tell from the picture. Nice choice with the Sportrax especially. After 10 yrs of owning or riding about every brand I really think Honda makes the most durable/dependable ATV on the market. You can't wear them out.

 

Now you need a trailer! :lol: Might as well get one big enough to haul a few extra machines in case a few pals wanna go ride!

 

BTW-you rarely see broken legs with atv wrecks. Usually you get a few cracked ribs, concussion and a shattered pelvis. But hardley ever broken legs. Just thougt I'd let you know.... :lol::lol:

Posted

It's a 300, they wouldn't come down in price on the 400, and I only bought it for friends to ride. I don't want to wrench on the one that I don't even ride, so I wanted to go with a more bulletproof sport for the "extra".....Hence buying the Honda.

 

I will probably wait until spring to buy a trailer, but yeah...I'll be getting one.

 

Leg breaks are pretty common on quads if the rider doesn't wear boots or use nerfs. :lol: I got them to throw in the nerfs and a helmet for each quad, and I already have the boots for me, so I should be safe there...As far as my hips go....I aint that old!!! :lol: I have done the rib thing a couple of times, and fractured my skull in two places once as well. But that's a different story, not related to riding ATVs.

Posted
Now you need a trailer! :lol:

This is the trailer I got. It is made by a guy out of Loveland CO specifically for ATV's. The ramps are built into the rails. one in back and one on the right side (behind the ATV).

 

Mine is a 2 machine trailer though he does make one for 3 machines (adds another side loading in back).

 

faf09ff1.jpg

Posted

I love the Hondas. The d**n things are bullet proof. i had a Z-400 and it just didnt have enough giddy up and go. Handles great though. Now I have a DS650 Baja. This is one wicked machine. Almost to much for me. But its great fun on teh weekends.

 

344183_117_full.jpg

Posted

You guys all make me sick :lol: My wife won't let me get one! I am trying to find a good used one, or something... I want it for hunting, pleasure riding while camping, etc... still no dice. Regardless, you all have very nice toys, NOW SHARE!!! :-D

Posted

Now you need a trailer!  :lol:

This is the trailer I got. It is made by a guy out of Loveland CO specifically for ATV's. The ramps are built into the rails. one in back and one on the right side (behind the ATV).

 

Mine is a 2 machine trailer though he does make one for 3 machines (adds another side loading in back).

 

faf09ff1.jpg

I'm shocked they would not budge on the 400EX price being the TRX450R is coming out. I have a 400EX myself with a good bit of mods.... extremely reliable and hauls the mail pretty good. :lol:

 

One thing to keep an eye out for is that the front part of the Z400 frames are known to be a tad weaker than other sport quads. In the future I would recommend getting the frame gueseted (reinforce welds and angles).

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...