Jump to content

Recommended Posts

Posted

I see a lot of topics regarding 18” rim or 20” but none in the 22” range. I was hoping to do some Nittos size 285/50R22 whereas the stock tire is a 275/50R22. Will the increase in size make clearance to avoid cutting on my truck?

Posted

I have Terra Grappler  G2 285/50s and have no rubbing problem. Tires look way better than the junk stock ones also. I have been very happy so far.

Posted

wurgs, thanks for the reply!

 

Did you use the stock 22" rims that are on the 2019 denali or did you go aftermarket? Could I see a picture?

 

Thanks!

Posted

I also have Nitto Terra Grappler G2 285/50/r22 with no problems. I had Nitto Ridge Grapplers in 285/55/r22 from the dealership and they rubbed so I had them replaced with these. 

90476A15-DA36-4336-9DED-9F3F95EADB1B.jpeg

2FCEC352-E125-44DC-A16A-A04CDC1EFEE4.jpeg

93C82513-02AA-4AE5-8C2D-7975CFF7AB48.jpeg

Posted

Cylon,

 

That setup looks great! Thanks for the info!  That pretty much settles the fact that I want those tires now.

 

 

Posted

@Wurgs, do you have a lift on your denali? Apparently the AT4 has a stock 2" lift the denali doesn't and I thought maybe that would create some rub potential.

Posted

No lift and have the stock rims. can try to post a pic tomorrow if you like. 

Posted
18 hours ago, wurgs said:

No lift and have the stock rims. can try to post a pic tomorrow if you like. 

Yeah that would be awesome if you could post a pic or two

Posted

Here's a couple. Tire is hair over 1/8" from rubbing. I have had them since last november and no issues and huge improvement from stock tires

20200724_192546.jpg

20200724_192417.jpg

20200724_192440.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...