Jump to content

Recommended Posts

Posted (edited)

Hey guys,

 

I was looking at a way to make my lights broadcast a little further and just basically have more visibility at night. I noticed my truck is not very similar to many others out there, not sure if I would call it 'rare' but definitely a lack of information on it. I will leave some pictures of my truck here so you guys can see what I am talking about. These lights are more rectangular horizontal shapes and the ones that I see being installed and more common are the square vertical ones. To be clear, this is something I want to add to my truck and looking for feedback and recommendations. 

 

1.) Is there an RPO code that tells me specifically about these lights? As in if it is prewired to install OEM or aftermarket lights? 

 

2.) Can I install them and have the functionality I want? As in a separate switch, or will they only come on when my lights/high beams are on etc? 

 

3.) Like I said I have not been able to personally locate an install on a setup like mine, does anyone know how difficult it is or what I can expect? Maybe even someone knows of a guide showing an install similar to that of mine?

 

4.) On an unrelated note I am planning to finally get remote start in my truck. I was told by the dealer that my truck is 'remote start ready', I think it is (AQQ). He said I could expect to pay between $350 and $400. I heard that you cannot program them yourself but you can purchase as cheaper kit and only need to pay labor. Anyone have any advice about this or anything else I should be aware of when letting the dealer do this? He said the kit also comes with a hood latch sensor so the truck cannot be running if the hood latch is open or something. 

 

Also forgot to mention I was doing some looking around and like I said was not able to find much. However, I did come across these. Does anyone know if there is a GM part number or could the eBay ones be okay? 

https://www.ebay.com/itm/Pair-2016-2017-2018-GMC-Sierra-1500-LED-Bumper-Fog-Lights-Driving-Lamps-w-Switch-/132969104657

thumbnail_Image (10).jpg

thumbnail_Image (11).jpg

Edited by Hexa Fox
  • 1 month later...
Posted (edited)

did you crawl under the truck to see of the wire dongle is there? your at least gonna need a new headlight switch with the fog option, not sure but prob gonna need a flash by the dealer to make that work. may be better to get those ebay lights and just use an aftermarket switch.

 

edit: those lights come with a switch and aftermarket wiring so u should be gtg, just wont work with a stock fog switch if you go that route.

Edited by Hieneken49
  • Like 1
  • 1 month later...
Posted
On 1/21/2021 at 11:02 AM, Hieneken49 said:

did you crawl under the truck to see of the wire dongle is there? your at least gonna need a new headlight switch with the fog option, not sure but prob gonna need a flash by the dealer to make that work. may be better to get those ebay lights and just use an aftermarket switch.

 

edit: those lights come with a switch and aftermarket wiring so u should be gtg, just wont work with a stock fog switch if you go that route.

I just now noticed this. I do not know if I missed the email or what. Thanks for the response.

 

By wire dongle do you mean like an open coupler I could plug and play these lights directly into? No, I tried to look but it was a pretty cold day, I know there were a lot of covers and crap at first glance, I will take a better look next time I am out there. 

 

I cannot find any videos or guides to help with this specific install. I just want to make certain that something seemingly simple does not turn into the front of the truck torn apart and two months of work if you know what I mean. 

  • 3 weeks later...
Posted

When it comes to "fog" lights, many of the articles out there have the mindset of "if you mount the lights low, they're fog lights. If you mount them higher up, they're driving lights". True fog lights adhere to a standard known as J583. I installed a set of the Rigid J583 LED, NOT cheap but so worth the money. Last year we were  driving through TN mountains and the fog was like soup. Many had their fog lights on and all I kept hearing from the wife was "thank you for getting these lights".  Great visibility forward and way to the sides of the road outshining everyone with no bounce back of the light and nobody flashing from oncoming traffic for being a distraction.

  • Like 1
Posted
On 3/24/2021 at 10:37 AM, Hyker said:

When it comes to "fog" lights, many of the articles out there have the mindset of "if you mount the lights low, they're fog lights. If you mount them higher up, they're driving lights". True fog lights adhere to a standard known as J583. I installed a set of the Rigid J583 LED, NOT cheap but so worth the money. Last year we were  driving through TN mountains and the fog was like soup. Many had their fog lights on and all I kept hearing from the wife was "thank you for getting these lights".  Great visibility forward and way to the sides of the road outshining everyone with no bounce back of the light and nobody flashing from oncoming traffic for being a distraction.

Good information to know. I know I should have did research to figure something like this out. To be honest, I just thought it would be a cool project and would add some extra light. Now I am going to want my lights to include J583 lol.

 

Anyway, I was surprised to see that there is not a lot available when it comes to these lights. I thought there would be several after market people making them but it looks like this type of fog lamp is rare. If anyone finds anything let me know. I am not certain if mine are called something specific or something and that is what I am missing or what.

 

I went out and got under the truck the other day and could not see anything. I am going to have to wait until I can drive it up on my large ramps and take a light up there. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,679 Guests (See full list)

  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...