Jump to content

Tow A Ford

diyer2

By diyer2
in The Off-Topic Bar

 Share

Recommended Posts

dieselfan1 Senior Enthusiast

dieselfan1

Posted
Posted

Fix Or Repair Daily
Found On Road Dead
Backwards... Driver Returns On Foot
Backwards... Dorks Ride On Fords
Factory Ordered Road Disaster
Factory Ordered Rebuilt Dodge(Datsun)
Flip Over Read Directions
Four Old Rusted Doors
Fixed On Race Day
Ford Owner Really Dumb
For Only Retarded Drivers
Ford Owners Recommend Dodge
Flipped Over Russian Dunebuggy
Found On Russian Dump
For Off Road Death
it Freaking Only Runs Downhill
Fat Old Rusted Dog
Freaking Old Rusted Dodge(Datsun)
Frigin Oakies Really Dig it
Funky Old Road Dog
Found On Roadside's Destroyed
Backwards...Don't Ride Over Fifty
Fixed-up Old Repossesed Dodge
Found Old Rebuilt Dodge
Forget OutRunning Dale
Found On Railroad Deserted
Found On Railroad Dead
Fools Only Read Directions
First On Repair Dolly
Favorite Of Redneck Drivers
Backwards- Dumb Retards Own Fords
Funny Old Rebuilt Dodge
Fast Only Rolling Downhill
Found On Russian Dump
Forfiet On Race Day
Found On River Dead
Failure Of Research & Development

Sent from my Pixel 3 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Jumped up 15 cents yesterday. $4.15
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I have never seen GM instructions for the other trucks as per the HD with the 6 speed or the half tons but had got the impression that the HD trucks with the 6 speed were not having the same problem that the 10 speed and pan presented. Also video that I have seen of the HD 10 speed with the gas engine starting in 2024 model year showed that it was a real struggle to even make it work when pulling down hard on the exhaust after undoing the exhaust hanger bracket on the side of the transmission as after all there is little room for the pipe to even go down behind the Y joint as it soon would hit a frame cross member. Also that they had tried just like I did with the gasket off and no way was that pan coming out any way they tried to manipulate the pan. From that as well as the local transmission shop talking about the pain in the rear issue, I was not expecting my pan to come out because GM shows it was not even intended to come out without dealing with the exhaust piping.    It would be nice to claim, here's what you do and its easy to remove the pan guaranteed on any HD truck with the gas 10 speed but dollars to donuts the next guy trying what I did would not have the same luck as the exhaust was just manufactured slightly different and be pissed off at my claim that the pan comes out with no issue. Its more of a try and see if your particular truck might work like mine did .... or not !. 
    • carkhz316
      Correct way to service 2024 l8t allison trans?

      By carkhz316 · Posted

      Sorry I didn't see this until now, but it works on both the 6 speed and 10 speeds, as well as all the half tons too.
    • 1998sleaze
      Engine vibration after motor mount replacement.

      By 1998sleaze · Posted

      Hello, I have a 2018 GMC Sierra 1500 that I recently changed both motor mounts on due to the driver's side being blown out. After replacement I seem to have a steady vibration that I can feel in the pedals and the back of the seat. At this point I'm convinced that the aftermarket "Anchor" branded mounts I used are not performing as well as OE, the only real reason I ended up using the mounts in question was because my local dealers were out a few months to get a Driver's side mount. I've tried "Neutralizing" the mounts according to the motor mount TSB published for these truck to no avail. My trans mount is also in great shape and seems to be absorbing vibrations swimmingly. As far as I can tell there is no issues idling, my idle RPM is steady and I've recently put GM plugs and wires on, however, I have not cleaned the throttle body or intake valves. Any one else have a similar experience with aftermarket mounts? Patience certainly is a virtue that I wish I exercised here. Thank you!
    • CamGTP
      Winter Returned

      By CamGTP · Posted

      I still saw people out for runs, on their bikes/motorcylces, jeeps with the doors off driving around here the past 2 days. I guess we are just used to it here haha.   Tasted like a bonfire the last 2 days.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...